Danh mục sản phẩm

Code :

Code: 230
Display: Service call
230: Error
Description: TONER Reader not Installed
Remedy: TONER reader Device error. Does the error recur?
Check the connector connection of CN3 on the high voltage power supply. Replace the 86M board after check the connector connection of HVIF on the 86M board.

Code: 231
Display: Service call
231: Error
Description: TONER Reader I/F Error
Remedy: TONER reader I/F error. Does the error recur?
Check the connector connection of CN3 on the high voltage power supply. Replace the 86M board after check the connector connection of HVIF on the 86M board.

Code: 240
Display: Service call
240: Error
Description: Engine Program. Memory Error
240: Flash Memory Hardware Error
Remedy: 240: Flash Memory Hardware Error If the error occurs again after returning on the power supply, replace the board of the unit.

Code: 905, 906
Display: Service call
905: Error
906: Error
Description: Short circuit error of the Frame thermistor (thermistor defect) is detected
Remedy: Does the error recur? Yes Turn on the power again. Replace the fuser unit. Replace the 86M board.

Code: 907
Display: Service call
907: Error
Description: High temperature error of the frame thermistor (over 150)is detected
Remedy: Does the error recur? Yes Turn on the power again. Replace the fuser unit.Replace the 86M board.

Code: 908
Display: Service call
908: Error
Description: Low temperature error of the Frame thermistor (lower than [environment temperature -10]) is detected
Remedy: Does the error recur? Yes Turn on the power again. Replace the fuser unit. Replace the 86M board.

Code: 918
Display: Service call
918: Error
Description: Duplex Fan-0 Alarm Detection
Remedy:

Code: 923
Display: 923: Error
Description: Image Drum Lock Error
The ID motor does not rotate correctly.
Remedy: The ID motor does not rotate correctly. Is the error message displayed when the power is turned on again?
Check if the ID unit is set correctly. Replace the ID unit. Replace the ID motor.

‹ First < 4 5 6 7 8 >

0