Danh mục sản phẩm

Code :

Code: 928
Display: Service call
928: Error
Description: Fuser Motor Lock Error
Remedy:

Code: 980
Display: Service call
980: Error
Description: Media coiling error to the fuser
Media is coiled to the fuser
Remedy: Media is coiled to the fuser Turn Off the power supply. Replace the fuser.

Code: 981
Display: Service call
981: Error
Description: Difference between PU model version detected and CU model version detected
High-voltage power supply I/F error when initializing
86M board SRAM error
CRC check error of PU download data
86M board Flash ROM hash check error
86M board Flash ROM writing error
The communication error with ASIC on the CU board is detected
Remedy: Does the error recur? Yes Turn Off/On the power supply. Replace the 86M board.
Is the cable between 86M board and the high-voltage power supply unit correctly connected? Isn’t there defective contact point?
Reconnect correctly.Check the defective contact point of highvoltage system. Replace the high voltage power supply.
Does the error recur? Yes Turn Off the power supply again Replace the 86M board
After PU data is downloaded (PU fireware, custom media data, head correction data), CRC check error is detected. After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Does the error recur? Yes Turn on the power supply again Replace the 86M board
Does the error recur? After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Replace the 86M board.

Code: F0C, FFE, FFF
Display: Service call
203: Error
204: Error
207: Error
208: Error
213: Error
214: Error
F0C: Error
FFE: Error
FFF: Error
Description: CU program trouble (203~214 are not generated in usual operation)
Remedy: Incorrect processing is performed by the CU program. Does the error recur? Turn on the power supply again. Replace 86M board.

‹ First < 5 6 7 8