Description: The BCU cannot communicate with the finisher properly.
The BCU cannot communicate with the finisher properly.
Causes: • Poor connection between the BCU board and the finisher main board • Finisher main board defective • BCU board defective • Noise on the interface cable
Description: Engine Startup Error
Several possible causes for this error: At power on or after the machine leaves the energy conservation mode: • /ENGRDY signal does not assert • IPURDY signal does not assert After power on and the prescribed time has elapsed: • No EC response from the engine • No PC response from the engine • No SC response from the engine During machine operation mode: • Write to Rapi drive failure (could not locate destination on the PCI) • After the /ENGRDY signal asserts with no effect.
Causes: • BCU - Controller Board disconnected • BCU board defective • Controller board defective • Mother board defective • Software error; switch off/on, if that fails, change the engine firmware • PSU-E or PSU-C defective
Description: Controller Startup Error
The line between the controller board and the operation panel does not open correctly when the machine is powered on, or after the machine was powered on communication between the controller and operation panel is suspended. The controller board and operation panel could not exchange the handshake (FDH) and acknowledge (FEH) signals within 15 s of the operation panel reset after power on, or after 2 retries there was no response to the transmission line confirmation command issued every 30 s from the operation panel to the controller board.
Description: ADF Feed-in Motor Error
While the feed motor is operating, the encoder pulse signal is not received withinthe specified time, or the paper size length encoder signal cannot be detectedwithin the specified time (the encoder is built into the feed-in motor).
Causes: • Feed-in motor defective • Paper length sensor • ADF main control board defective • Poor connection between the feed-in motor and ADF main board
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.