Danh mục sản phẩm

Code :

Code: SC2000
Description: A diagnostic error occurred at power on. The printer controller has a hardware problem.
Causes: Printer controller defective.

Code: SC2001
Description: An error has occurred in the printer controller. The controller has a software problem.
Causes: The controller software has a problem

Code: SC2002
Description: An error has occurred in the controller. The controller has a software or hardware problem.
Causes: Printer controller defective.

Code: SC302
Description: Charge Roller Current Leak Definition [B] A charge roller current leak signal is detected.
Causes: · Charge roller damaged · High voltage supply board defective · Poor PCU connection

Code: SC304
Description: Charge Roller Current Correction Error Definition [B] The charge roller bias correction is performed twice even if the maximum charge roller bias (–2,000 V) is applied to the roller.
Causes: · ID sensor defective

Code: SC320
Description: Polygon Mirror Motor Error Definition [B] The polygon mirror motor does not reach its operating speed within 20 seconds after the polygon mirror motor on signal, or the lock signal is still activated for more than 20 seconds after the polygon mirror motor off signal.
Causes: · Polygon mirror motor defective · Poor connection between the polygon mirror motor driver and the BICU board · BICU board defective

Code: SC321
Description: No Laser Writing Signal (F-Gate) Error 1 Definition [B] The laser writing signal (F-gate) does not go to LOW for more than 15 seconds after the paper reaches the registration sensor.
Causes: · BICU board defective · Poor printer controller connection · Printer controller defective

Code: SC322
Description: 1st Laser Synchronization Error Definition [B] The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
Causes: · Poor connection between the laser synchronization detector board and the LD unit. · Laser synchronization detector board out of position · Laser synchronization detector board defective · LD unit defective

1 2 3 4 > Last ›

0