• Code: 101
• Description: Exposure Lamp Error
  Insufficient white level detected when scanning the white plate.
• Causes: • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position, etc.) • Lamp stabilizer board (or connector) defective • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position

• Code: 120
• Description: Scanner home position error 1
  Scanner home position sensor did not detect OFF condition during initialization or copying.
• Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

• Code: 121
• Description: Scanner home position error 2
  Scanner home position sensor did not detect ON condition during initialization or copying.
• Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

• Code: 122
• Description: Scanner home position error 3
  Scanner home position sensor did not detect OFF condition during book or ADF scan operation.
• Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

• Code: 123
• Description: Scanner home position error 4
  Scanner home position sensor did not detect ON condition during book or ADF scan operation.
• Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached

• Code: 192
• Description: SBU auto-adjustment error
  During SBU auto-adjustment the detected white level was out of range.
• Causes: • SBU auto adjustment was not done correctly • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position. etc.) • Defective stabilizer board (or connector) • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position

• Code: 2001
• Description: Printer controller self-diagnostic error
  Printer controller's power-on self-diagnostic detected an error.
• Causes: • Self-diagnostic error

• Code: 2002
• Description: Printer controller: FGATE error
  Printer application returned FGATE error notification to copier.
• Causes: • FGATE error