Causes: [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus. • Defective clock generator • Defective I2C bus • Defective I2C port on the CPU Replace the controller board.
Description: USB NAND Flash ROM error EEPROM error 1: EEPROM access
Causes: [9001] USB NAND Flash ROM cannot be read. • Defective controller board [9101] The ID of the USB NAND Flash ROM cannot be read. • Defective controller board [9110] The USB NAND Flash ROM controller is disconnected. • Defective controller board
Description: During the I/O processing, a reading error occurred. The 3rd reading failure causes this SC code. During the I/O processing, a writing error occurred
Description: Flash ROM verification error Verification error of the flash ROM on the controller board occurs This SC is logged at 1st error detection.SC819 is issued at 2nd error detection. SC819 is issued at 2nd error detection
Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (Bluetooth).
Causes: • During machine operation, the Wireless LAN device (Bluetooth) is inserted into the controller board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.