Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP5002 — Trang 20/24

Code: 854

Description: Wireless LAN Error 2
During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (Bluetooth).
Causes: • During machine operation, the Wireless LAN device (Bluetooth) is pulled out from the controller board.

Code: 855

Description: Wireless LAN error 3
An error is detected on the wireless LAN card (802.11a/g, g or Bluetooth).
Causes: • Wireless LAN card defective • Wireless LAN card connection incorrect

Code: 856

Description: Wireless LAN error 4
An error was detected on the wireless LAN card (Bluetooth).
Causes: • Wireless LAN card defective • PCI connector (to the mother board) loose

Code: 857

Description: USB I/F Error
The USB driver is not stable and caused an error.
Causes: • Bad USB card connection Replace the controller board

Code: 858

Description: HDD Encryption unit error 1
A serious error occurs when data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -00 - Encryption key acquisition error: The controller fails to get a new encryption key. • Defective controller board Replace the controller board. -01 - Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board Replace the controller board. -02 - NVRAM data encryption error 1: An error occurs while the NVRAM data is encrypted. • Defective NVRAM on the controller board Replace the NVRAM. -30 - NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. • Defective controller board Replace the controller board. -31 - Other error: A serious error occurs while the data is encrypted. • Same as SC991

Code: 859

Description: HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -08 - HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. -09 - Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. • Power failure during the data encryption Initialize the HDD. -10 - Data read/write error: The DMAC error is detected twice or more. • Same as SC863

Code: 860

Description: HDD startup error at main power on
• HDD is connected but a driver error is detected. • The driver does not respond with the HDD within 30 s.
Causes: • HDD is not initialized • Label data is corrupted • Defective HDD Initialize the HDD with SP5832-001.

Code: 861

Description: HDD re-try failure
At power on, the HDD is detected. Power supply to the HDD is interrupted after the system has entered the energy save mode, but after the HDD has been awakened from the energy save mode, it does not return to the ready status within 30 sec.
Causes: • Harness between HDD and controller board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie