Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C720 — Trang 3/85

Code: 182

Description: Scanner Unit Fan Error: SBU Cooling Fan (D016/D097 only) The MCU issued a motor lock signal for the SBU cooling fan in the scanner unit
Causes: • Scanner unit harness loose, defective • Fan, MCU harness loose, defective • SBU Fan motor defective • MCU defective • SIB defective
Remedy:

Code: 183

Description: Scanner Unit Fan Error: Lamp Regulator Fan (Left) (D016/D097 only) The MCU issued a lock signal for the lamp regulator fan (front, left).
Causes: • Scanner unit harness loose, defective • Fan, MCU harness loose, defective • Lamp regulator (left) fan motor defective • MCU defective • SIB defective
Remedy:

Code: 185

Description: Exposure Lamp 1 Lamp Regulator (Right) Error (D016/D097 only) The MCU detected a defect in the lamp regulator (right) when the 1st exposure lamp lit. .
Causes: • 1st exposure lamp defective • 1st lamp FFC (flat film cable) loose or defective • MCU to lamp regulator (left) harness defective • Lamp regulator (left) is defective • MCU defective • SIB defective
Remedy:

Code: 186

Description: Exposure Lamp 2 Lamp Regulator (Left) Error (D016/D097 only) The MCU detected a defect in the lamp regulator (left) when the 2nd exposure lamp lit. .
Causes: • 2nd exposure lamp defective • 2nd lamp FFC (flat film cable) loose or defective • MCU to lamp regulator (left) harness defective • Lamp regulator (left) is defective • MCU defective • SIB defective
Remedy:

Code: 187

Description: Scanner Unit Fan Error: Scanner Unit Exhaust Fan (D016/D097 only) The MCU issued a lock signal for the the scanner unit exhaust fan (rear, left).
Causes: • Scanner unit harness loose, defective • Fan, MCU harness loose, defective • Scanner unit exhaust fan motor defective • MCU defective • SIB defective
Remedy:

Code: 188

Description: Scanner Unit Fan Error: Scanner Motor Cooling Fan (D016/D097 only) The MCU issued a lock signal for the scanner motor cooling fan.
Causes: • Scanner unit harness loose, defective • Fan, MCU harness loose, defective • Scanner unit exhaust fan motor defective • MCU defective • SIB defective
Remedy:

Code: 195

Description: Serial Number Error The serial number in the NVRAM does not match the one in the BCU. • Incorrect serial number • Incorrect firmware installed
Causes: Check if the engine firmware in the machine is correct. Input the correct serial number. For details about inputting a serial number, consult your supervisor.
Remedy:

Code: 202

Description: Polygon motor error 1: Laser Unit YM The polygon mirror motor of LD unit YM does not reach the targeted operating speed within the prescribed time.
Causes: • Harness to the IPU disconnected • Harness inside the laser unit YM disconnected • Polygon motor drive board defective • IPU defective
Remedy: 1. Check the harness connection to the IPU. 2. Check the harness connection inside the laser unit YM. 3. Replace the polygon motor drive board. 4. Replace the IPU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie