Description: Drum cleaning motor LOCK error: K. The lock signal remained HIGH or LOW for longer than the prescribed time for the K, M, C, or Y, drum cleaning motor.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Disconnected harness from the drum cleaning motor • Drum cleaning motor shaft locked, blocked by obstruction • Drum cleaning motor defective
Remedy: 1. Check or replace the drum cleaning blade. 2. Clear the waste toner stuck in the drum cleaning unit. 3. Check the harness connection of the drum cleaning motor. 4. Remove the obstruction around the drum cleaning motor shaft. 5. Replace the drum cleaning motor.
Description: Drum cleaning motor LOCK error: C. The lock signal remained HIGH or LOW for longer than the prescribed time for the K, M, C, or Y, drum cleaning motor.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Disconnected harness from the drum cleaning motor • Drum cleaning motor shaft locked, blocked by obstruction • Drum cleaning motor defective
Remedy: 1. Check or replace the drum cleaning blade. 2. Clear the waste toner stuck in the drum cleaning unit. 3. Check the harness connection of the drum cleaning motor. 4. Remove the obstruction around the drum cleaning motor shaft. 5. Replace the drum cleaning motor.
Description: Drum cleaning motor LOCK error: M. The lock signal remained HIGH or LOW for longer than the prescribed time for the K, M, C, or Y, drum cleaning motor.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Disconnected harness from the drum cleaning motor • Drum cleaning motor shaft locked, blocked by obstruction • Drum cleaning motor defective
Remedy: 1. Check or replace the drum cleaning blade. 2. Clear the waste toner stuck in the drum cleaning unit. 3. Check the harness connection of the drum cleaning motor. 4. Remove the obstruction around the drum cleaning motor shaft. 5. Replace the drum cleaning motor.
Description: Drum cleaning motor LOCK error: Y. The lock signal remained HIGH or LOW for longer than the prescribed time for the K, M, C, or Y, drum cleaning motor.
Causes: • Drum cleaning blade turned up (flipped) • Waste toner stuck in the drum cleaning unit • Drum filming • Disconnected harness from the drum cleaning motor • Drum cleaning motor shaft locked, blocked by obstruction • Drum cleaning motor defective
Remedy: 1. Check or replace the drum cleaning blade. 2. Clear the waste toner stuck in the drum cleaning unit. 3. Check the harness connection of the drum cleaning motor. 4. Remove the obstruction around the drum cleaning motor shaft. 5. Replace the drum cleaning motor.