Description: Finisher staple hammer motor error
Stapling does not finish within 150 ms after the staple hammer motor turned on. Staple mode cannot be used.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor connector or harness loose, broken, defective • Staple hammer motor defective
Description: Finisher stack feed-out motor error
The stack feed-out belt HP sensor did not activate within 4550 pulses after the stack feed-out motor turned on. Staple mode cannot be used.
Causes: • Stack feed-out HP sensor defective • Stack feed-out motor overload • Stack feed-out motor defective
Description: Finisher shift tray 1 lift motor error
Tray shift does not finish within 15 sec. after the shift motor turned on, or the stack height sensor does not activate within 15 sec. after the shift tray lift motor turned on.
Causes: • Shift tray lift motor connector or harness loose, broken, defective • Shift tray lift motor overload due to an obstruction • Shift tray lift motor defective
Description: Finisher stapler rotation motor error
Stapler rotation does not finish within 1100 pulses after the staple rotation motor turned on, or the stapler does not return to its home position within 1100 pulses after stapling finished.
Causes: • Stapler rotation motor connector or harness loose, broken, defective • Motor overloaded due to an obstruction • Motor defective
Description: Finisher punch motor error
After the punch motor is turned on, the punch HP sensor does not activate within 250 ms.
Causes: • Punch motor harness or connector loose, broken, defective • Punch motor defective or overloaded due to obstruction • Punch HP sensor connector or harness loose, broken, defective • Punch HP sensor defective
Description: Finisher stapler positioning motor error
After the stapler motor turned on, the stapler did not return to its home position within 5357 pulses, or the stapler HP sensor does not activate within 5357 pulses after the stapler motor turned on.
Causes: • Stapler positioning motor connector or harness loose, broken, defective • Stapler positioning motor defective or overloaded due to an obstruction • Stapler HP sensor connector or harness loose, broken, defective • Stapler HP sensor defective
Description: Finisher upper tray shift motor error
The upper tray did not reach its home position within 1.25 sec. after the upper tray shift motor turned on.
Causes: • Upper tray shift motor connector or harness loose, broken, defective • Upper tray shift motor defective or overloaded due to an obstruction • Upper tray shift sensor connector or harness loose, broken, defective • Upper tray shift sensor defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.