Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP8200DN — Trang 9/14

Code: 750

Description: 1000/3000-sheet finisher: Tray lift motor error
The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers.

Code: 753

Description: Return roller motor error
This occurs during the operation of the lower tray pressure motor
Causes: • Motor harness disconnected, loose, defective • Motor overloaded • Home position sensor harness disconnected, loose, defective • Home position defective

Code: 760

Description: Finisher punch motor error
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Punch HP sensor disconnected, defective • Punch motor disconnected or defective • Punch motor overload due to obstruction

Code: 763

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor

Code: 764

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harnessf

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation

Code: 817

Description: Monitor Error
This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.
Causes: • OS Flash ROM data defective; change the controller firmware • SD card data defective; use another SD card
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie