Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC730DN — Trang 3/15

Code: 332-03

Description: Toner supply feed lock M
Under the condition that the Toner Cartridge has not reached the end, an error that no toner is supplied has been detected over n times in succession. n: The value was set at SP3-131-015.
Causes: • Disconnected or broken Solenoid: Upper cover. (Failed to open the toner supply shutter) • Disconnection of Toner Supply Clutch • Failed PCDU. (Toner leak) • Toner clogging
Remedy: • Check the connector connection or check for broken wire. • Replace the Solenoid: Upper Cover • Replace the PCDU • Replace the Toner Cartridge.

Code: 332-04

Description: Toner supply feed lock Y
Under the condition that the Toner Cartridge has not reached the end, an error that no toner is supplied has been detected over n times in succession. n: The value was set at SP3-131-015.
Causes: • Disconnected or broken Solenoid: Upper cover. (Failed to open the toner supply shutter) • Disconnection of Toner Supply Clutch • Failed PCDU. (Toner leak) • Toner clogging
Remedy: • Check the connector connection or check for broken wire. • Replace the Solenoid: Upper Cover • Replace the PCDU • Replace the Toner Cartridge.

Code: 364-01

Description: Toner End Sensor output count error Bk
The output count from the Toner End Sensor indicates an average of 0.
Causes: - Bad connector contact or connector disconnected/wire broken - Failed TE Sensor
Remedy: - Turn the main power of the printer OFF and then ON - Check the connector connection or check for broken wire. - Replace the LED Head. - Replace the TE sensor (using the same troubleshooting procedure as for LED).

Code: 364-02

Description: Toner End Sensor output count error C
The output count from the Toner End Sensor indicates an average of 0.
Causes: - Bad connector contact or connector disconnected/wire broken - Failed TE Sensor
Remedy: - Turn the main power of the printer OFF and then ON - Check the connector connection or check for broken wire. - Replace the LED Head. - Replace the TE sensor (using the same troubleshooting procedure as for LED).

Code: 364-03

Description: Toner End Sensor output count error M
The output count from the Toner End Sensor indicates an average of 0.
Causes: - Bad connector contact or connector disconnected/wire broken - Failed TE Sensor
Remedy: - Turn the main power of the printer OFF and then ON - Check the connector connection or check for broken wire. - Replace the LED Head. - Replace the TE sensor (using the same troubleshooting procedure as for LED).

Code: 364-04

Description: Toner End Sensor output count error Y
The output count from the Toner End Sensor indicates an average of 0.
Causes: - Bad connector contact or connector disconnected/wire broken - Failed TE Sensor
Remedy: - Turn the main power of the printer OFF and then ON - Check the connector connection or check for broken wire. - Replace the LED Head. - Replace the TE sensor (using the same troubleshooting procedure as for LED).

Code: 365-01

Description: Toner End Sensor upper limit sensor error Bk
The Toner End Sensor still indicates that the remaining amount of toner is at the "upper limit", although 30 g or more toner has been consumed.
Causes: - Stained TE Sensor surface - Failed TE Sensor
Remedy: • Turn the main power of the printer OFF and then ON. • Check the connector connection. • Clean/replace the sensor (using the same troubleshooting procedure as for LED).

Code: 365-02

Description: Toner End Sensor upper limit sensor error C
The Toner End Sensor still indicates that the remaining amount of toner is at the "upper limit", although 30 g or more toner has been consumed.
Causes: - Stained TE Sensor surface - Failed TE Sensor
Remedy: • Turn the main power of the printer OFF and then ON. • Check the connector connection. • Clean/replace the sensor (using the same troubleshooting procedure as for LED).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie