Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC730DN — Trang 14/15

Code: 872-00

Description: HDD mail received data error
An error is detected in the HDD at machine power-on
Causes: • Defective HDD • Power failure while accessing the HDD
Remedy: • Use SP5832-007 to initialize the HDD (HDD-related: Format: Mail received data). • Replace the HDD.

Code: 873-00

Description: HDD mail transfer error
An error is detected in the HDD at machine power-on.
Causes: • Defective HDD • Power failure while accessing the HDD
Remedy: • Use SP5832-008 to initialize the HDD (HDD-related: Format: Mail transfer data). • Replace the HDD.

Code: 875

Description: Delete All error (HDD)
An error is detected before executing HDD Erase.
Causes: 875-01 • Error occurred at “hddchack –I”. 875-01 • Data erase failed.
Remedy: Turn the main switch off and on.

Code: 876-00

Description: Log data error An error was detected in the handling and configuration of the log data at power up or during machine operation.
Causes: 876-01 • Damaged log data file (This can be caused by the machine being switched off while it is operating.) 876-02 • The log encryption setting is enabled, but no encryption module is installed. 876-03 Invalid log encryption key (due to defective NVRAM data) 876-04 • The log data file has been encrypted even though log encryption is disabled (due to a defective NVRAM). • The log data file has not been encrypted even though log encryption is enabled (due to a defective NVRAM) 876-05 • Installed NVRAM has been used in another machine. • Installed HDD has been used in another machine. 876-99 • Causes other than those described above
Remedy:

Code: 878

Description: TPM system authentication error
Causes: 878-01 Defective file system in the USB Flash memory 878-02 An error occurred in the TPM or the TPM driver. 878-03 An error occurred in the TPM software stack.
Remedy: Replace the Controller Board.

Code: 881

Description: Management area error
Defective software has been detected.
Causes: Abnormal accumulation of authentication information in the software
Remedy: Turn the main switch off and on.

Code: 900

Description: Electronic counter error
The value provided by the electronic total counter is outside the normal range.
Causes: • Unexpected NVRAM installed • Defective NVRAM • NVRAM data corruption • Data is stored in an unexpected area due to external causes. • The count requests made by SRM upon receiving the PRT have not yet been processed.
Remedy: Install an NVRAM device designed specifically for the model.

Code: 920

Description: Printer application error
A serious application error that stops the machine from operating is detected.
Causes: 920-00 At PM startup, no response was returned within the specified period of time. 920-01 A time-out occurred during PM operation. 920-02 WORK memory acquisition failed. 920-03 The filter process cannot be started. 920-04 The filter process was aborted.
Remedy: Turn the main switch off and on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie