Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D045 MPC1800 PG-C2 — Trang 4/11

Code: 573

Description: Belt temperature and absolute humidity error
• The temperature sensor at the belt unit detects less than –15°C or more than 85°C. • The humidity sensor at the belt unit detects less than 0% or more than 100%.
Causes: • Disconnect harness • Defective temperature sensor at the ink head
Remedy: 1. Check the connector (CN114). 2. Replace the temperature sensor and/ or humidity sensor at the ink head.

Code: 610

Description: Mechanical counter error The machine detects disconnection of a mechanical counter when SP5987-1 is set to "ON".
Causes: • Disconnected mechanical counter
Remedy: 1. Connect a mechanical counter.

Code: 620

Description: Communication command error between BCU and ADF
A communication error occurs after the machine detects the correct communication between BCU and ADF
Causes: • Defective connection between ADF and BCU • Defective ADF • Defective IPU
Remedy: 1. Check the connection between ADF and BICU. 2. Replace the ADF. 3. Replace the BICU.

Code: 630

Description: CSS communication error The machine tries to communicate with one of the terminals of a relevant service center. - An error signal returns.
Causes: • Communication error on the public telephone network (logged only; the machine can still operate)
Remedy:

Code: 632

Description: MF accounting device error 1 The machine sends a data frame - No normal end signal returns. - This symptom happens three times.
Causes: • Defective or broken line between machine and device
Remedy:

Code: 633

Description: MF accounting device error 2
The machine is communicating with the accounting device.- The break signal returns.
Causes: • Defective or broken line between machine and device
Remedy:

Code: 634

Description: MF accounting device error 3
A backup RAM error is reported from the accounting device.
Causes: • Defective accounting device controller • Defective battery in the accounting device
Remedy:

Code: 635

Description: MF accounting device error 4
A battery voltage error is reported from the accounting device.
Causes: • Defective accounting device controller • Defective battery in the accounting device
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie