Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D045 MPC1800 PG-C2 — Trang 9/11

Code: 865

Description: HD access error
An error other than SC863 and SC864 is detected while operating the HDD.
Causes: • Defective HDD
Remedy:

Code: 866

Description: SD card authentication error
A digital license error of an SD card application is detected.
Causes: • SD card data has corrupted.
Remedy: 1. Store correct data in the SD card.

Code: 867

Description: SD card error An application SD card is removed from the boot slot while an application is activated.
Causes: • An application SD card is ejected.
Remedy:

Code: 868

Description: SD card access error
(-13 to -3: File system error, other number: Device error) An error report is sent from the SD card reader.
Causes: • SD card not inserted correctly • SD card defective • Controller board defective
Remedy: 1. For a file system error, format the SD card on PC. 2. For a device error, turn the main switch off and on. 3. Remove and re-install the SD card. 4. Replace the SD card. 5. Replace the controller.

Code: 870

Description: Address book data error The address book in the hard disk is accessed. - An error is detected in the address book data; address book data is not read; or data is not written into the address book..
Causes: • Data corruption • Defective hard disk • Defective controller software
Remedy: 1. Replace the hard disk (the user codes and counters are recovered when the main switch is turned on if those data are stored in Smart Device Monitor for Admin).

Code: 872

Description: HDD received mail data error
An error is detected in the received mail data partition of the HDD at machine initialization.
Causes: • Defective HDD • Power failure during an access to the HDD
Remedy: 1. Initialize the HDD partition (SP5-832-007). 2. Replace the HDD.

Code: 873

Description: HDD sent mail data error
An error is detected in the sent mail data partition of the HDD at machine initialization.
Causes: • Defective HDD • Power failure during an access to the HDD
Remedy: 1. Initialize the HDD partition (SP5-832-008). 2. Replace the HDD.

Code: 874

Description: Delete All error 1: HDD
An error is detected while the all data of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (B735).
Causes: • Not installed Data Overwrite Security Unit (SD card) • Defective HDD
Remedy: 1. Install the Data Overwrite Security Unit (B735). 2. Replace the HDD.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie