Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D045 MPC1800 PG-C2 — Trang 6/11

Code: 686

Description: Ink Cartridge Communication Error
Error indicated after five tries following machinedetected error. -011 D Ink cartridge C Device ID error -012 Channel error (Disconnect bus cable) -013 Device Error (No ACK) -014 Interrupted communication -015 Communication time out -016 Communication error while offline -017 Buffer full -018 Parameter error -021 D Ink cartridge M Device ID error -022 Channel error (Disconnect bus cable) -023 Device Error (No ACK) -024 Interrupted communication -025 Communication time out -026 Communication error while offline -027 Buffer full -028 Parameter error -031 D Ink cartridge Y Device ID error -032 Channel error (Disconnect bus cable) -033 Device Error (No ACK) -034 Interrupted communication -035 Communication time out -036 Communication error while offline -037 Buffer full -038 Parameter error -041 D Ink cartridge K Device ID error -042 Channel error (Disconnect bus cable) -043 Device Error (No ACK) -044 Interrupted communication -045 Communication time out -046 Communication error while offline -047 Buffer full
Causes: • Garbled device ID data • Defective connection • No IDCHIP • Abnormal noise
Remedy: 1. Check the I2C circuit. 2. Replace the ink cartridge.

Code: 687

Description: Memory address command error
The BICU does not receive a memory address command from the controller 120 seconds after paper is in the position for registration.
Causes: • Loose connection • Defective controller • Defective BICU
Remedy: 1. Check if the controller is firmly connected to the BICU. 2. Replace the controller. 3. Replace the BICU.

Code: 818

Description: Watchdog error
While the system program is running, no other programs can run (due to a bus hold or endless loop).
Causes: • Defective controller board
Remedy: 1. Reinstall the system program. 2. Replace the controller board.

Code: 819

Description: Kernel stop
Causes: [0696e] B Process error System completely down • Defective RAM DIMM • Defective SD card in slot 1 • Defective controller • Software error 1. Check and/or replace the RAM DIMM. 2. Check and/or replace the SD card in slot 1. 3. Replace the controller. [0766d] B VM full error Unexpected system memory size • Defective RAM DIMM • Defective SD card in slot 1 • Defective controller • Software error 1. Check and/or replace the RAM DIMM. 2. Check and/or replace the SD card in slot 1. 3. Replace the controller. See NOTE at the end of the SC table. [4361] B Cache error Cache error in the CPU • Defective CPU 1. Replace the controller board. [----] B The others Error in OS • Defective memory • Defective flash memory • Defective CPU 1. Replace the controller board.
Remedy:

Code: 820

Description: Self-Diagnostic Error: CPU
Causes: [0001-0015] [000A-000D]: Detailed error code During the boot monitor program and self-diagnostic, any exception or cut-in are not supposed to happen. If these happen, it is defined as SC. • Defective CPU device • Defective boot monitor program or self-diagnostic program 1. Replace the controller board. 2. Reinstall the system firmware. B [00FF]: Detailed error code Cache access error in the CPU • Defective CPU • Defective local bus 1. Turn the main power switch off and on. 2. Reinstall the system program. 3. Replace the controller board. B [0601, 0602, 0605, 0606, 0607, 0609]: Detailed error code Exceptional command does not operate even though it is executed on purpose. • Defective CPU devices 1. Replace the controller board. B [060A-060E]: Detailed error code Cut-in command does not operate when it is executed. • Defective CPU devices • Defective ASIC devices 1. Replace the controller board. B [0610]: Detailed error code Timer cut-in does not operate even though it is set. • Defective CPU devices 1. Replace the controller board. B [0612]: Detailed error code Cut-in ASIC occurs. • Defective ASIC • Defective devices in which ASIC detects cut-in. 1. Replace the controller board. B [06FF]: Detailed error code The pipeline clock frequency rate is different from the prescribed value. • Defective CPU devices • Mode bit data error, which is used for initializing CPU. 1. Replace the controller board. B [0702]: Detailed error code The result when the program is executed in the command cache is different from desirable value. • Insufficient CPU cache • Insufficient memory process speed 1. Replace the controller board. 2. Replace the RAM DIMM. B [0709, 070A]: Detailed error code Even you write the data in the only cache of memory, the data is actually written in another area (not cache) of memory. • Defective CPU devices • Incorrect SPD • Boot mode setting error 1. Replace the controller board. 2. Replace the RAM DIMM. B [0801, 0804, 0807, 0808, 0809, 80A]: Detailed error code An error occurs when checking the TLB. • Defective CPU devices 1. Replace the controller board. B [4002-4005]: Detailed error code The calculation error in the CPU occurs. • Defective CPU 1. Replace the CPU.
Remedy:

Code: 821

Description: Self-Diagnostic Error: ASIC
Causes: [0B00] B ASIC error The write-&-verify check error has occurred in the ASIC. • Defective controller board 1. Replace the controller. [0B06] B ASIC not detected The ASIC of the I/O is not detected. • ASIC (controller board defective) • Poor connection between North Bridge and PCI I/F. 1. Replace controller board. [0B10] B SHM register check error Failed to initialize or could not read connection bus. Data in SHM register incorrect. • Defective bus connection • Defective SHM 1. Replace controller board. [0D05] B Timer error between ASIC and CPU The CPU checks if the ASIC timer works properly compared with the CPU timer. If the ASIC timer does not function in the • System firmware problem • Defective RAM-DIMM specified range, this SC code is displayed. • Defective controller • Reinstall the controller system firmware. 1. Replace the RAM-DIMM. 2. Replace the controller board.
Remedy:

Code: 822

Description: Self-Diagnostic Error: HDD
Causes: [3003]: B Timeout error/ [3004]: Command error When the main switch is turned on or starting the self-diagnostic, the HDD stays busy for the specified time or more. • Loose connection • Defective HDD • Defective controller 1. Check that the HDD is correctly connected to the controller. 2. Replace the HDD. 3. Replace the controller.
Remedy:

Code: 823

Description: Self-diagnostic Error: NIB
Causes: [6101] B MAC address check sum error The result of the MAC address check sum does not match the check sum stored in ROM. • Defective controller 1. Replace the controller. [6104] B PHY IC error The PHY IC on the controller cannot be correctly recognized. Same as SC823-[6101] [6105] B PHY IC loop-back error An error occurred during the loop-back test for the PHY IC on the controller. Same as SC823-[6101]
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie