Description: Delete All error 2: Data area An error is detected while the all data of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (B735).
Causes: • The logical format for HDD fails.
Remedy: 1. Turn the main switch off/on and try the operation again.
Causes: -001 D Log Data Error 1 An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating. • Damaged log data file in the HDD 1. Initialize the HDD with SP5832-004. -002 D Log Data Error 2 Same as -001 • An encryption module not installed 1. Disable the log encryption setting. 2. Install the encryption module. -003 D Log Data Error 3 Same as -001 • Invalid encryption key log due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting. -004 D Log Data Error 4 Same as -001 • Unusual encryption function log due to the defective NVRAM data 1. Initialize the HDD with SP5832-004. -005 D Log Data Error 5 Same as -001 • Installed NVRAM or HDD, which is used in other machine 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. -099 D Log Data Error 99 Same as -001 • Other than above causes 1. Ask your supervisor.
Description: HDD Data Overwrite Security SD card error The all delete cannot be executed even though the Data Overwrite Security Unit (B735) is installed and activated.
Description: Net file error The management file for net files is corrupted; net files are not normally read. Netfiles: Jobs to be printed from the document server using a PC and the DeskTop- Binder software
Causes: • Defective hard disk • Data corruption • Defective software
Remedy: 1. When SC860 to 865 occurs with this SC at the same time: • The main cause is in SC860 to 865. Refer to those possible causes. 2. When only SC925 occurs: • Initialize the net file partition of the HDD (with SP5-832-11) after you ask the customer for permission. This also erases the transmitted and received fax documents. • If the above actions do not solve the problem, try to initialize all partitions of the HDD with SP5-832-1 after you ask the customer for permission. • Replace the HDD.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.