Description: Software performance error The software attempted to perform an unexpected operation. NOTE: When this error occurs, the file name, address, and data will be stored in NVRAM. This information can be checked by using SP7-403. See the data and the situation in which this SC occurs. Then report the data and conditions to your technical control center
Description: Software continuity error The software attempted to perform an unexpected operation. However, unlike SC990, the process can keep on running.
Causes: • Logged only; the machine can continue to operate
Description: Application function selection error The application selected by a key press on the operation panel does not start or ends abnormally.
Causes: • Software for that application is defective • An option required by the application (RAM, DIMM, board) is not installed. • Too complicated nest of the fax group address
Remedy: 1. As for the fax operation problem, simplify the nest of the fax group address.
Description: Application start error After switching the machine on, the application does not start within 60 s. (No applications start or end normally.)
Causes: • Software for that application is defective • An option required by the application (RAM, DIMM, board) is not installed.
Remedy: 1. Check the setting of SP5875-001. If the setting is set to "1 (OFF)", change it to "0 (OFF)".
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.