Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M124 SPC830DN — Trang 19/24

Code: 720-75

Description: Stacking sponge roller motor
Occurs during the operation of the stacking sponge roller motor.
Causes: Defective motor. Motor harness disconnected, loose, defective Motor overloaded. Defective stacking roller HP sensor.
Remedy: Turn the main power switch off and on.

Code: 720-80

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: Defective motor. Motor harness disconnected, loose, defective. Motor overloaded.
Remedy: Turn the main power switch off and on.

Code: 720-81

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: Defective motor. Disconnected, loose or defective harness. Motor overloaded.
Remedy: Turn the main power switch off and on.

Code: 770

Description: Shift motor error
The shift motor HP sensor does not detect any change for 1.86 seconds after the shift motor has turned on at power on or during its operation.
Causes: Defective shift motor. Defective shift motor HP sensors.
Remedy: Turn the main power switch off and on.

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: The bridge unit is not installed. Defective bridge unit. Re-install the bridge unit. Turn the main power switch off and on.
Remedy: • Re-install the bridge unit. • Turn the main power switch off and on.

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: The finisher's connection is faulty. The finisher is not attached to a device equipped with the bridge unit. Defective finisher.
Remedy: Reconnect the finisher or bridge unit, and then turn the main power switch off and then back on.

Code: 816

Description: Energy saving I/O sub-system error
Causes: The energy saving I/O sub-system detects an error. • Defective energy saving I/O sub-system • The energy saving I/O sub-system detects a controller board error (No response)
Remedy: • Turn the main power switch off and on. • Replace the controller board.

Code: 817

Description: Monitor error
This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.
Causes: OS Flash ROM data defective. SD card data defective. Change the controller firmware. Use another SD card.
Remedy: • Change the controller firmware. • Use another SD card.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie