Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 477S — Trang 4/15

Code: C46E

Description: Power Supply Thermistor Temp High
Causes:
Remedy: Turn off the Power of the printer and back on.

Code: C46F

Description: Power Supply Thermistor Temp Low
Causes:
Remedy: Turn off the Power of the printer and back on.

Code: C4C0

Description: The fuse has blown out.
Causes: Is the fuser unit installed normally? Does this error recur?
Remedy: After cleaning the connecting connector of the fuser unit, re-install the fuser unit. Turn on the power again. After checking for the sure cable connection, replace the PU or Board IBY.

Code: C4E3

Description: Fuser motor lock error
Causes: Fuser does not rotate normally. Does this error recur?
Remedy: Check if the fuser is installed normally or not. Replace the fuser. Replace the fuser motor.

Code: C4FA

Description: Media wrapped around the fuser error
Causes: Media has wrapped around the fuser.
Remedy: Turn off the power. Replace the fuser.

Code: C56A ... C56D

Description: Option unit I/F error (C56A=Duplex Unit, C56B=2nd Tray, C56C=3rd Tray C56D=4th Tray)
Causes: Does this error recur? Does this error recur?
Remedy: Turn on the power again. Check for sure connection of the connectors. Replace the option unit.

Code: C56E

Description: When LCF is setting,Tray2 Unit I/F Error or Tray3 Unit I/F Error is report from PU. Interchange the error to LCF Unit I/F Error by CU. Occur:When communication has dropped off.
Causes:
Remedy: Turn on the power again.

Code: C5A1

Description: Read/write error of the engine EEPROM is detected.
Causes: Does this error recur?
Remedy: Yes Turn off the power of the printer and back on. Replace the PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie