Description: Memory Errors A memory access error occurred. This troubleshooting procedure applies to these errors. 117-365: Verify Flash Error
Causes: • Image Processor Board, PL10.6.6
Remedy: 1 Check the Image Processor Board for correct installation. Is the Image Processor Board correctly installed? Go to step 2. Reseat connections on the Image Processor Board. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.
Remedy: 1 Check the Control Panel connections. Is P/J202 on the Control Panel and P/J5301 secure? Go to Step 2. Secure the connection. 2 Check the A-OP-ESS harness continuity. Disconnect P/J202 from the Control panel and P5301. Is the harness damaged? Repair or replace the harness (PL10.8.12). Go to step 3. 3 Check for +5 V at J403 of the I/P Board. Is there +5 V between ground <=> J403-4 on the MCU Board when the Interlock Switch is closed? Replace the Control Panel. Replace the I/P Board.
Description: Memory Errors A memory access error occurred. This troubleshooting procedure applies to these errors. 131-397: Verify Flash Error
Causes: • Image Processor Board, PL10.6.6
Remedy: 1 Check the Image Processor Board for correct installation. Is the Image Processor Board correctly installed? Go to step 2. Reseat connections on the Image Processor Board. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.