Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 6505 — Trang 12/14

Code: 093-925, 093-950, 093-951, 093-952

Description: IOT Toner (YMCK) CRUM Comm Error
Causes: • Toner Cartridge (Y) (PL5.1.24) • Toner Cartridge (M) (PL5.1.23) • Toner Cartridge (C) (PL5.1.22) • Toner Cartridge (K) (PL5.1.21) • CRUM Connector (PL5.1.14) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • Toner CRUM Harness Assy (PL5.1.26)
Remedy: 1 Reseat the Toner Cartridge (Y, M, C or K). Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check the connections between the MCU Board and CRUM Connector (Y, M, C or K). Are P/J31 and P/J311(Y) / P/J312 (M) / P/J313(C) / P/J314 (K) seated securely? Go to step 4. Reseat the connector(s) securely, then go to step 3. 3 Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Check the Toner CRUM Harness Assy for continuity. Disconnect P/J11 from the MCU Board. Disconnect P/J311(Y) / P/J312 (M) / P/ J313(C) / P/J314 (K) from the CRUM Connector (YMCK). Is each cable of P/J31 <=> P/J311(Y) / P/J312 (M) / P/ J313(C) / P/J314 (K) continuous? Go to step 5. Replace the Toner CRUM Harness Assy. 5 Check the output power of CRUM Connector (Y, M, C or K). Disconnect P/J31 on the MCU Board. Is the voltage across ground <=> J31-3(Y), -7(M), -11(C), -15(K) on the MCU Board, about +3.3VDC? Replace the Dispenser Assy. Go to step 6. 6 Replace the Toner Cartridge (Y, M, C or K). Does the error still occur when the power is turned Off and On? Replace the MCU Board Complete.

Code: 093-926, 093-960, 093-961, 093-962

Description: IOT (YMCK) CRUM ID Error
Causes: • CRUM Connector (PL5.1.14) • Toner Cartridge (Y) (PL5.1.24) • Toner Cartridge (M) (PL5.1.23) • Toner Cartridge (C) (PL5.1.22) • Toner Cartridge (K) (PL5.1.21) • Toner CRUM Harness Assy (PL5.1.26) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Close the Toner Door correctly. Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check the toner type. Is XEROX Toner installed? Go to step 3. Verify that the non-Xerox toner in use is compatible with the Phaser 6500/ WorkCentre 6505 printers. 3 Reseat the Toner Cartridge (Y, M, C or K), and check that the lock key is in the lock position. Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Replace the Toner Cartridge (Y, M, C or K), and check that the lock key is in the lock position. Does the error still occur when the power is turned Off and On? Go to step 5. Complete. 5 Check the connectors between the MCU Board and CRUM Connector. Are P/J31 and P/J311(Y), P/J312(M), P/ J313(C), P/J314(K) connected correctly? Go to step 7. Reconnect P/ J31 and/or P/J311 (Y), P/J312 (M), P/J313 (C), P/J314 (K) securely, then go to step 6. 6 Does the error still occur when the power is turned Off and On? Go to step 7. Complete. 7 Check the Toner CRUM Harness Assy for continuity. Disconnect J31 from the MCU Board. Disconnect J311, J312, J313, and/or J314 from the CRUM Connector. Is each cable of J31 <=> J311/J312/ J313/J314 continuous? Go to step 8. Replace the Toner CRUM Harness Assy (Y, M, C or K). 8 Check the output power of CRUM Connector (Y, M, C or K). Disconnect P/J31 on the MCU Board. Is the voltage across ground <=> P31-3(Y), -7(M), -11(C), -15(K) on the MCU Board, about +3.3VDC? Replace the CRUM Connector (Y, M, C or K). Replace the MCU Board.

Code: 093-930, 093-931, 093-932, 093-933

Description: IOT Toner Cartridge Life Over
Causes: • Toner Cartridge (Y) (PL5.1.24) • Toner Cartridge (M) (PL5.1.23) • Toner Cartridge (C) (PL5.1.22) • Toner Cartridge (K) (PL5.1.21) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Replace the Toner Cartridge (Y, M, C or K). Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

Code: 093-970, 093-971, 093-972, 093-973

Description: IOT Print Cartridge Detached
Causes: • Toner Cartridge (Y) (PL5.1.24) • Toner Cartridge (M) (PL5.1.23) • Toner Cartridge (C) (PL5.1.22) • Toner Cartridge (K) (PL5.1.21) • Toner CRUM Harness Assy (PL5.1.26) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check the Toner Type. Is XEROX Toner installed? Go to step 3. Verify that the non-Xerox toner in use is compatible with the Phaser 6500/ WorkCentre 6505 printers. 3 Reseat the Toner Cartridge (Y, M, C or K), and check that the lock key is in the lock position. Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Replace the Toner Cartridge (Y, M, C or K). Does the error still occur when the power is turned Off and On? Go to step 5. Complete. 5 Check the Toner CRUM Harness Assy for continuity. Disconnect J31 from the MCU Board. Disconnect J311 (Y) from the CRUM Connector. Are P/J31 and P/J311(Y),P/J312(M),P/ J313(C),P/J314(K) connected correctly? Go to step 6. Replace the Toner CRUM Harness Assy 6 Reseat the MCU Board connectors. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

Code: 094-422

Description: IOT Belt Unit Near Life
Causes: • Transfer Belt (PL6.1.7) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Using Printer Diagnostics, check the life count value of the Transfer Unit: Printer Diag > Parameter > Life DTB Waste > Read. Do the values returned indicate near end-of-life (100 K)? Does the life counter value indicate near end of life? After replacing the Transfer Belt , initialize the life counter value: Printer Diag > Parameter > Life DTB Waste > Read Replace the MCU Board.

Code: 094-911

Description: IOT Belt Unit Life Over
Causes: • Transfer Belt (PL6.1.7) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Using Printer Diagnostics, check the life count value of the Transfer Unit: Printer Diag > Parameter > Life DTB Waste > Read. Do the values returned indicate near end-of-life (100 K)? Does the life counter value indicate near end of life? After replacing the Transfer Belt , initialize the life counter value: Printer Diag > Parameter > Life DTB Waste > Read Replace the MCU Board.

Code: 116-315 ... 116-987

Description: Image Processor Board Error
Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2)
Remedy: 1 Does the error still occur when the power is turned Off and On? Replace the Image Processor Board. Complete.

Code: 116-316, 116-320

Description: ESS DIMM Slot RAM R/W Check Fail / ESS DIMM Slot RAM Error
Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2) • Optional Memory Card (SFP PL8.1.15; MFP PL8.1.4)
Remedy: 1 Is the customer using the recommended memory card? Go to step 3. Replace with recommended memory, then go step 2. 2 Does the error still occur when the power is turned Off and On? Go to step 3. Complete. 3 Reseat the Optional Memory Card. Does the error still occur when turning on the power? Go to step 4. Complete. 4 Replace the Optional Memory Card. Does the error still occur when turning on the power? Replace the IP Board. Complete.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie