Code :

Code: 26.0:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 0 floater
Remedy: Try the following operations on the Yellow Ink Cartridge (T7100) or the Matte Black Ink Cartridge (T7100 Monochrome). • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 26.1:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 1 floater
Remedy: Try the following operations on the Cyan Cartridge (T7100) or the Dark Gray Cartridge (T7100 Monochrome). • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 26.2:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 2 floater
Remedy: Try the following operations on the Matte Black Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 26.3:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 3 floater
Remedy: Try the following operations on the Dark Gray Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 26.4:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 4 floater
Remedy: Try the following operations on the Magenta Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 26.5:01
Description: Ink Cartridge (color n)
Causes: Bad contact detected in ISS slot 5 floater
Remedy: Try the following operations on the Gray Cartridge (T7100); the T7100 Monochrome should not experience this error. • Remove the Ink Cartridge and reinstall it into the printer. • Replace the Ink Cartridge. • Check that the ISS to Cartridge cable is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable

Code: 27.1:01
Description: Printhead (color n)
Causes: Calibration failed to due to poor performance of the Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 1
Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

Code: 27.2:01
Description: Printhead (color n)
Causes: Calibration failed to due to poor performance of the Yellow Printhead (T7100) or Matte Black Printhead (T7100 Monochrome) in slot 2
Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

< 1 2 3 4 5 6 7 > Last ›