Danh mục sản phẩm

Code :

Code: -
Display: Unable to mopy job
Description: A mopy job cannot be mopied because of a memory, disk, or configuration problem.
Remedy:

Code: -
Display: UNABLE TO SEND
Description:
Remedy: To temporarily hide this message in order to fax or send to e-mail, touch IGNORE.

Code: -
Display: Unable to send Fax. Please check fax configuration.
Description: The MFP was unable to send the fax.
Remedy: For complete information about solving fax problems, see the HP LaserJet Analog Fax 300 User Guide.

Code: -
Display: Unable to store job
Description: A job cannot be stored because of a memory, disk, or configuration problem.
Remedy:

Code: -
Display: USB accessory error
Description: Power requirements for a USB accessory attached to the MFP are beyond supported limits.
Remedy: Detach the USB accessory, and then turn the MFP off then on. Try a similar accessory that has its own power supply or requires less power.

Code: -
Display: USB storage <X> not functional
Description: A parameter in a USB storage accessory is not working properly.
Remedy: Turn the MFP off. Disconnect the USB storage accessory and replace it with a new USB storage accessory. Turn the MFP on.

Code: -
Display: USB storage <X> removeds
Description: A USB storage accessory has been disconnected since the MFP was turned on.
Remedy: To continue using the USB accessory, turn off the MFP and connect the accessory again. Otherwise, turn the MFP off then on to clear the message.

Code: -
Display: User name or password is incorrect. Please re-enter.
Description: The user name or password was typed incorrectly.
Remedy: Retype the user name and password.

‹ First < 4 5 6 7 8 9 10 > Last ›

0