Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Latex 3000 — Trang 11/42

Code: 10.04.34:15

Description: E-cabinet TUR fuse blown. The take-up reel PCA 32V fuse has blown.
Causes: TUR PCA 32V fuse blown (F4)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F4. 4. If the problem persists, call support.

Code: 10.04.35:15

Description: E-cabinet PSU-3-5 fuse blown. The unused 32V fuse has blown.
Causes: Unused 32V fuse blown (F3)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F3. 4. If the problem persists, call support.

Code: 10.04.35:40

Description: E-cabinet PSU-3-5 power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. Unused 32V switch is overloaded.
Causes: Unused 32V switch overload
Remedy: No corrective actions as output is not used.

Code: 10.04.41:15

Description: E-cabinet 12V CARR fuse blown. The carriage 12V fuse has blown.
Causes: Carriage 12V fuse blown (F2)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F2. 4. If the problem persists, call support.

Code: 10.04.42:15

Description: E-cabinet PSU-4-2 fuse blown. The unused 12V fuse has blown.
Causes: Unused 12V fuse blown (F1)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F1. 4. If the problem persists, call support.

Code: 10.04.51:15

Description: E-cabinet SAX fuse blown. The SAX 42V fuse has blown.
Causes: SAX 42V fuse blown (F13)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F13. 4. If the problem persists, call support.

Code: 10.04.52:15

Description: E-cabinet PSU-5-2 fuse blown. The unused 42V fuse has blown.
Causes: Unused 42V fuse blown (F14)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F14. 4. If the problem persists, call support.

Code: 10.04.61:15

Description: E-cabinet CURING-1 fuse blown. The curing-1 24V fuse has blown.
Causes: Curing-1 24V fuse blown (F18)
Remedy: 1. Run the subsystem diagnostic. 2. Shut down the machine (completely, main switch off). 3. Replace the fuse F18. 4. If the problem persists, call support.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie