• Code: 10.05.21:40
• Description: E-cabinet ISS power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The ISS 24V switch is overloaded.
• Causes: ISS 24V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the ISS.

• Code: 10.05.22:40
• Description: E-cabinet VAPOR power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The vapor removal 24V switch is overloaded.
• Causes: Vapor removal 24V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the Vapor removal.

• Code: 10.05.31:40
• Description: E-cabinet PPS power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The PPS 32V switch is overloaded.
• Causes: PPS 32V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the PPS.

• Code: 10.05.32:40
• Description: E-cabinet WW power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The printhead cleaning system 32V switch is overloaded.
• Causes: Printhead cleaning system 32V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the printhead cleaning system.

• Code: 10.05.33:40
• Description: E-cabinet SVS power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The SVS 32V switch is overloaded.
• Causes: SVS 32V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the SVS.

• Code: 10.05.34:40
• Description: E-cabinet TUR power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The take-up reel PCA 32V switch is overloaded.
• Causes: Take-up reel PCA 32V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the TUR sensor system.

• Code: 10.05.41:40
• Description: E-cabinet 12V CARR power output overload. Run subsystem diagnostics. If problem persists, call your support representative. The carriage 12V switch is overloaded.
• Causes: Carriage 12V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the Carriage.

• Code: 10.05.42:40
• Description: E-cabinet PSU-4-2 power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. Unused 12V switch is overloaded.
• Causes: Unused 12V switch overload
• Remedy: No corrective actions as output is not used.