• Code: 10.05.51:40
• Description: E-cabinet SAX power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The SAX 42V switch is overloaded.
• Causes: SAX 42V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the SAX motor.

• Code: 10.05.52:40
• Description: E-cabinet PSU-5-2 power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. Unused 42V switch is overloaded.
• Causes: Unused 42V switch overload
• Remedy: No corrective actions as output is not used.

• Code: 10.05.62:40
• Description: E-cabinet DS-2 power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The DS-2 24V switch is overloaded.
• Causes: DS-2 24V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the DS-2 AC converter.

• Code: 10.05.72:40
• Description: E-cabinet DS-1 power output overload. Run subsystem diagnostic. If problem persists, call your support representative.. The DS-1 24V switch is overloaded.
• Causes: DS-1 24V switch overload
• Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists, most likely there is a problem in the DS-1 AC converter.

• Code: 10.06.09:40
• Description: One or more emergency stops are pressed. Run subsystem diagnostic. If problem persists, call your support representative.
• Causes:
• Remedy: 1. Ensure that no emergency stops are pressed. 2. Run safety diagnostics to check the emergency stops. 3. Run e-cabinet diagnostics and check the e-box interconnect PCA LEDs.

• Code: 10.07.07:40
• Description: Interlock bypass activated. Run subsystem diagnostic. If problem persists, call your support representative.
• Causes: Safety bypass in the e-cabinet enabled
• Remedy: Disable the bypass to operate the printer in normal mode. For the customer to use the printer normally, the bypass must be disabled.

• Code: 10.08.00:01
• Description: E-cabinet fan not working. Fan rotation feedback signal not detected
• Causes: Fan malfunction or not connected
• Remedy: 1. Check the fan cabling. 2. Replace the fan if necessary. See E-cabinet fan. 3. If the problem persists, call support.

• Code: 10.09.00:01
• Description: Safety circuit powered by default. The PCA detects power in the safety circuit when there should be no power.
• Causes: PCA malfunction
• Remedy: 1. Replace the PCA. 2. If the problem persists, call support.