Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC5002 — Trang 22/28

Code: 822

Description: Self-diagnostics error: HDD
Causes: [3003] HDD timeout Check performed only when HDD is installed: • HDD device busy for over 31 seconds. • After a diagnostic command is set for the HDD, but the device remains busy for over 6 seconds. • Defective HDD device • Defective HDD connector • Defective ASIC device 1. Replace or uninstall the HDD device. 2. Replace the HDD connector. 3. Replace the controller board. [3004] Diagnostics command error Result of the issuance of diagnostic command is error. • Defective HDD device 1. Replace or remove the HDD device. [3013] HDD timeout (First machine) HDD device busy for over 31 seconds. Mandolin is not detected. After a diagnostic command is set for the HDD, but the device remains busy for over 6 seconds. • Defective HDD device • Defective HDD connector • Defective ASIC device 1. Replace or remove the HDD device. 2. Replace the HDD connector 3. Replace the controller board [3014] Diagnostics command error (First machine) Result of the issuance of diagnostic command is error. Mandolin is not detected. A w/r/c error of the HDD register • Defective HDD device 1. Replace the HDD device.
Remedy:

Code: 823

Description: Self-diagnostics error: NIC
Causes: [6101] MAC address check sum error The result of the MAC address check sum does not match the check sum stored in ROM. • Defective SEEP ROM • Defective I2C bus (connection) 1. Replace the controller board. [6104] PHY IC error The PHY IC on the controller cannot be correctly recognized. • Defective PHY chip • Defective ASIC MII I/F 1. Replace the controller board. [6105] PHY IC loop-back error An error occurred during the loop-back test for the PHY IC on the controller. • Defective PHY chip • Defective MAC of ASIC (SIMAC/COMIC/CELLO) • Defective I/F with the PHY board • Defective solder on the PHY board 1. Replace the controller board.
Remedy:

Code: 824

Description: Self-diagnostics error: NVRAM (resident) [1401] NVRAM verify error NVRAM device does not exist or NVRAM device is damaged.
Causes: • No NVRAM device • Destructive NVRAM device • NVRAM backup battery exhausted • NVRAM socket damaged
Remedy: 1. Replace the NVRAM device.

Code: 833

Description: Self-diagnostic error 8: Engine I/F ASIC
Causes: [0F30] ASIC (Mandolin) for engine control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. • Defective ASIC (Mandolin) for system control • Defective North Bridge and AGPI/F 1. Replace the Engine I/F board (mother board). [50B1] Could not initialize or read the bus connection. • Defective connection bus • Defective SSCG 1. Replace the Engine I/F board (mother board). [50B2] Value of the SSCG register is incorrect. • Defective connection bus • Defective SSCG 1. Replace the Engine I/F board (mother board).
Remedy:

Code: 834

Description: Self-diagnostic error: Optional memory. [5101] An error occurs after write/verify check for optional RAM on the engine I/F board (mother board).
Causes: • Defective memory device
Remedy: 1. Replace the Engine I/F board (mother board).

Code: 838

Description: Self-diagnostic error: Clock generator. [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus
Causes: • Defective clock generator • Defective I2C bus • Defective I2C port on the CPU
Remedy: 1. Replace the controller board.

Code: 840

Description: EEPROM access error During the I/O processing, reading error is occurred. The 3rd reading failure issues this SC code. During the I/O processing, writing error is occurred.
Causes: • Defective EEPROM
Remedy: 1. Replace the EEPROM.

Code: 841

Description: EEPROM read error Mirrored data of the EEPROM is different from the original data in EEPROM.
Causes: • Data in the EEPROM is overwritten for some reason.
Remedy: 1. Turn the main switch off and on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie