Description: Address book error An error is detected in the data copied to the address book over a network.
Causes: • Defective software program • Defective HDD • Incorrect path to the server
Remedy: 1. Mount correctly the media that stores the address book data and turn the main power switch off and on. 2. Initialize the address book data (SP5-846-050). 3. Initialize the partition for the HDD address book (Turn the main power switch off and on) (SP5-832-006). 4. Replace the HDD.
Description: Delete All error 1: HDD An error is detected while all of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (D377).
Causes: • Data Overwrite Security Unit (SD card) not installed • Defective HDD
Remedy: 1. Turn the main switch off/on and try the operation again. 2. Install the Data Overwrite Security Unit (D377) again. 3. Replace the HDD.
Description: Delete All error 2: Data area An error is detected while all of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (D377).
Causes: • The logical format for the HDD fails.
Remedy: 1. Turn the main switch off/on and try the operation again
Description: Log Data Error An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: -01 Log Data Error 1 • Damaged log data file in the HDD 1. Initialize the HDD with SP5-832-004. -02 Log Data Error 2 • An encryption module not installed 1. Replace or set again the encryption module. 2. Disable the log encryption setting with SP9-730-004 ("0" is off.). -03 Log Data Error 3 • Invalid log encryption key due to defective NVRAM data 1. Initialize the HDD with SP5-832-004. 2. Disable the log encryption setting with SP9-730-004 ("0" is off.) -04 Log Data Error 4 • Unusual log encryption function due to defective NVRAM data 1. Initialize the HDD with SP5-832-004. -05 Log Data Error 5 • Installed NVRAM or HDD which is used in another machine. 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5-832-004. -99 Log Data Error 99 • Other than the above causes 1. Ask your supervisor.
Description: HDD Data Overwrite Security SD card error The 'all delete' function cannot be executed but the Data Overwrite Security Unit (D377) is installed and activated.