• Code: SC200
• Description: Suction Cap HP Sensor Error The maintenance unit slide sensor did not detect the suction cap and wiper blade assembly at home position.
• Causes: •X HP sensor connection loose, broken, defective •X Paper or other obstacle blocking movement of the mechanism •X HP sensor defective
• Remedy:

• Code: SC201-01
• Description: Print Head Caps Home Position Sensor Error The cap sensor in he maintenance unit failed to detect the left cradle at the up position or down position (home position).
• Causes: •X HP sensor connection loose, broken, defective •X Paper or other obstacle blocking movement of the mechanism •X HP sensor defective
• Remedy:

• Code: SC201-02
• Description: Cleaner Unit Slider Sensor Error The slider sensor at the back of the maintenance unit failed to detect the cleaner unit at the forward position or the rear position (home position. The left cradle, suction cap, rubber wiper blade, and wipers comprise the maintenance cleaning unit.
• Causes: •X HP sensor connection loose, broken, defective •X Paper or other obstacle blocking operation of the motor •X HP sensor defective •X Motor defective
• Remedy:

• Code: SC202
• Description: Ink Level Detection Feeler Position Error One of the following conditions existed: •X When air was purged one or more of the feelers could not be detected so the operation could not continue. •X When the maintenance pump attempted to apply negative pressure on the print head ink tank, the feeler could not be detected at its prescribed position after the pressure was applied. •X OCFS could not detect the feeler(s) after the feeler sensor performed the check after filling.
• Causes: •X Feeler cannot be detected because it is out of position (loose, broken, defective, or blocked by an obstruction) •X Air release solenoid blocked •X Maintenance unit defective •X Print head ink tank defective •X Air release solenoid defective
• Remedy:

• Code: SC202-01 ... SC202-05
• Description: SC202-01 D Head 1: Ink Level Sensor Feeler Error at Air Release SC202-02 D Head 2: Ink Level Sensor Feeler Error at Air Release SC202-03 D Head 3: Ink Level Sensor Feeler Error at Air Release SC202-04 D Head 4: Ink Level Sensor Feeler Error at Air Release SC202-05 D Head 5: Ink Level Sensor Feeler Error at Air Release Feeler cannot be detected during air release.
• Causes: •X Feeler cannot be detected because it is out of position (loose, broken, defective, or blocked by an obstruction) •X Air release solenoid blocked •X Maintenance unit defective •X Print head ink tank defective •X Air release solenoid defective
• Remedy:

• Code: SC202-11 ... SC202-16
• Description: SC202-11 D Head 1: Air Leak at Negative Pressure SC202-12 D Head 2: Air Leak at Negative Pressure SC202-13 D Head 3: Air Leak at Negative Pressure SC202-14 D Head 4: Air Leak at Negative Pressure SC202-15 D Head 5: Air Leak at Negative Pressure. SC202-16 D Head Tanks 4 and 5: Air Leak at Negative Pressure. Air leak. Pressure applied but immediate leak and air detected.
• Causes: •X Feeler cannot be detected because it is out of position (loose, broken, defective, or blocked by an obstruction) •X Air release solenoid blocked •X Maintenance unit defective •X Print head ink tank defective •X Air release solenoid defective
• Remedy:

• Code: SC202-21 ... SC202-26
• Description: SC202-21 D Head 1: Nozzle or Filter Clogged (2HT System) SC202-22 D Head 2: Nozzle or Filter Clogged (2HT System) SC202-23 D Head 3: Nozzle or Filter Clogged (2HT System) SC202-24 D Head 4: Nozzle or Filter Clogged (2HT System) SC202-25 D Head 5: Nozzle or Filter Clogged (2HT System) SC202-26 D Head Tanks 4 and 5: Nozzle or Filter Clogged (2HT System) Nozzle or filter clogged (or both clogged). A color nozzle or filter is clogged
• Causes: •X Nozzle check •X Nozzle cleaning •X Nozzle flushing
• Remedy:

• Code: SC202-30
• Description: Insufficient suction Nozzle or filter, or both nozzle and filter clogged. Insufficient suction (1HT System) to perform maintenance and solve the problem.
• Causes: •X Nozzle check •X Nozzle cleaning •X Nozzle flushing •X Maintenance unit defective
• Remedy: