Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP8100DN — Trang 13/15

Code: 875

Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. The source of this error is the Data Overwrite Security Unit B735 running from an SD card.
Causes: • Turn the main switch off/on and try the operation again.

Code: 876

Description: Log data abnormal
An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: • Software error. Update the firmware • NVRAM defective • HDD defective

Code: 900

Description: Electrical total counter error
The total counter contains something that is not a number.
Causes: • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source

Code: 901

Description: SC901 Mechanical total count error
The IO board cannot receive the mechanical total count data.
Causes: • Mechanical total counter defective

Code: 920

Description: Printer error
An internal application error was detected and operation cannot continu
Causes: • Software defective; turn the machine off/ on, or change the controller firmware • Insufficient memory

Code: 921

Description: Printer font error
When the software application started, the printer did not detect a font on the SD card that it can use.
Causes: • The fonts on the SD card are not fonts that can be used with the printer

Code: 925

Description: Net File function error
The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below the SC code:
Causes: • Refer to the four procedures (Recovery from SC 925).

Code: 951

Description: F-gate assert error at write request
After the IPU receives an F-gate signal, it receives another F-gate signal.
Causes: • Software defective • BICU defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie