Description: HD access error When the error reply is returned during HDD operation.
Causes: The error reply returned from the HDD was other than SC863 (bad sector) or SC864 (CRC error). ((Branch numbers 01 to 23 refer to the generated partition codes, a to v, respectively.)
Description: SD card removal detection When an application SD card is removed from the slot while the application is activated.
Causes: An application SD card has been removed from the slot. 867-00 Removed from the mount point /mnt/sd0. 867-01 Removed from the mount point /mnt/sd1. 867-02 Removed from the mount point /mnt/sd2.
Remedy: 868-01 Download the Panasonic SD card formatter SD Formatter 3.1 (which is available at http://panasonic.jp/support/sd_w/download/ index.html), and then format the SD card on a Windows PC. 868-02 After turning the main switch off, remove the SD card to see if there is any problem on the contact surface between the SD card slot and the SD card. If there is no problem, re-insert the SD card and turn the main switch on to check whether the error occurs again. If the error still occurs, replace the SD card with the equivalent application SD card, and then turn the main switch on again to check whether the error occurs. If the error persists even after replacing the SD card, replace the Controller Board.
Description: Address book data error During startup or machine operation, an error is detected in the handling and the configuration of the address book data.
Causes: • Software bug • Incorrect reference to the address book data source (inside the machine, delivery server settings, and LDAP settings) • Inconsistent encryption settings and encryption key (This occurs as a result of a failure to initialize the address book data whenever replacing NVRAM or HDD.) • The media that stores the address book data—such as SD card or HDD—has been removed, or the machine configuration does not match the application setting. • Data corruption was detected while accessing the address book data.
Remedy: • Install the media containing the address book data correctly, then turn the main switch off and then on again. • Reset all of the option settings for HDD, SD/USB, and FlashROM (07A) to their defaults, and then run the following SP: SP5-846-046: UCS: Initialize all settings, address book data, and authentication information configuration information. (After implementation, wait for at least three seconds.) SP5-832-006: Initialize the partition (for HDD-equipped machines only).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.