Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Roland MDX540 — Trang 3/4

Code: FE:5

Description: ZA Servo CPU on the Main board is not operating correctly.
Causes: The program for the ZA Servo CPU fails to be downloaded from the Main CPU in the initial operation.

Code: FE:6

Description: There is a communication problem between the Main CPU and Spindle Servo CPU.
Causes: There is a problem in the electric route between the Main CPU and the Spindle Servo CPU. Spindle Servo CPU is not operating correctly.

Code: FE:7

Description: Spindle Servo CPU on the Main board is not operating correctly.
Causes: The program for the Spindle Servo CPU fails to be downloaded from the Main CPU in the initial operation.

Code: FE:8

Description: X Limit SW can not be detected.
Causes: X Limit SW is not attached correctly or defective. There is a bad contact or a cut-line in the cable.

Code: FE:9

Description: Y Limit SW can not be detected.
Causes: Y Limit SW is not attached correctly or defective. There is a bad contact or a cut-line in the cable.

Code: IS:10

Description: There is a problem in the spindle control circuit.
Causes: There is a problem in the spindle control circuit or the electric route between the Main board and Spindle board.

Code: IS:2

Description: Power voltage of the Spindle Motor is 20V or less.
Causes: Spindle Motor is defective. There is a bad contact or a cut-line in the cable. Spindle Board is defective

Code: IS:6

Description: There is a problem in the Spindle motor.
Causes: Spindle Motor is defective There is a bad contact or a cut-line in the cable.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie