• Code: 005-907
• Description: CVT Pre-Registration Sensor Static JAM RAP Paper remains on the DADF Pre Registration Sensor.
• Remedy: Execute Component Control[005-206 DADF Pre Registration Sensor]. Actuate the DADF Pre Registration Sensor (PL 15.7) with paper. The display changes. Y↓N→Check the connections of P/J781 and P/J761. P/J781 and P/J761 are connected correctly. Y↓N→Connect P/J781 and P/J761. Check the wire between J781 and J761 for an open circuit or a short circuit. The wire between J781 and J761 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P761-10 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P761-12 (+) and GND (-). Actuate the DADF Pre Registration Sensor with paper. The voltage changes. Y↓N→Replace the DADF Pre Registration Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Replace the DADF PWB (PL 15.3).

• Code: 005-908
• Description: CVT Registration Sensor Static JAM RAP Paper remains on the DADF Registration Sensor.
• Remedy: Execute Component Control[005-110 DADF Registration Sensor]. Actuate the DADF Registration Sensor (PL 15.7) with paper. The display changes. Y↓N→Check the connections of P/J782 and P/J761. P/J782 and P/J761 are connected correctly. Y↓N→Connect P/J782 and P/J761. Check the wire between J782 and J761 for an open circuit or a short circuit. The wire between J782 and J761 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P761-15 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P761-14 (+) and GND (-). Actuate the DADF Registration Sensor with paper. The voltage changes. Y↓N→Replace the DADF Registration Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Replace the DADF PWB (PL 15.3).

• Code: 005-909
• Description: DADF Lead Sensor Static Jam Lead Reg Sensor On detected at the timing below: 1. Power On 2. Feeder Cover Interlock Close 3. Platen Interlock Close.
• Remedy: If the problem occurs frequently, make sure that there is no obstacle blocking the light path on Lead Reg Sensor. Check the connections between the Lead Reg Sensor and the DADF PWB. If OK, replace the Lead Reg Sensor. If the problem persists, replace the DADF PWB (PL 15.3).

• Code: 005-910
• Description: DADF Out Sensor Static Jam Out Sensor On detected at the timing below: 1. Power On 2. Feeder Cover Interlock Close 3. Platen Interlock Close.
• Remedy: If the problem occurs frequently, make sure that there is no obstacle blocking the light path on Out Sensor. Check the connections between the Out Sensor and the DADF PWB. If OK, replace the Out Sensor. If the problem persists, replace the DADF PWB (PL 15.3).

• Code: 005-911
• Description: DADF Exit 1 Sensor Static Jam Exit1 Sensor On detected at the timing below: 1. Power On 2. Feeder Cover Interlock Close 3. Platen Interlock Close.
• Remedy: If the problem occurs frequently, make sure that there is no obstacle blocking the light path on Exit1 Sensor. Check the connections between the Exit1 Sensor and the DADF PWB. If OK, replace the Exit1 Sensor. If the problem persists, replace the DADF PWB (PL 15.3).

• Code: 005-912
• Description: DADF Exit 2 Sensor Static Jam Exit2 Sensor On detected at the timing below: 1. Power On 2. Feeder Cover Interlock Close 3. Platen Interlock Close.
• Remedy: If the problem occurs frequently, make sure that there is no obstacle blocking the light path on Exit2 Sensor. Check the connections between the Exit2 Sensor and the DADF PWB. If OK, replace the Exit2 Sensor. If the problem persists, replace the DADF PWB (PL 15.3).

• Code: 005-913
• Description: CVT Invert Sensor Static JAM RAP Paper remains on the DADF Invert Sensor.
• Remedy: Execute Component Control[005-211 DADF Invert Sensor]. Actuate the DADF Invert Sensor (PL 15.7) with paper. The display changes. Y↓N→Check the connections of P/J780 and P/J761. P/J780 and P/J761 are connected correctly. Y↓N→Connect P/J780 and P/J761. Check the wire between J780 and J761 for an open circuit or a short circuit. The wire between J780 and J761 is conducting without an open circuit or a short circuit. Y↓N→Repair the open circuit or short circuit. Measure the voltage between the DADF PWB P761-7 (+) and GND (-). The voltage is approx. +5VDC. Y↓N→Replace the DADF PWB (PL 15.3). Measure the voltage between the DADF PWB P761-9 (+) and GND (-). Actuate the DADF Invert Sensor with paper. The voltage changes. Y↓N→Replace the DADF Invert Sensor (PL 15.7). Replace the DADF PWB (PL 15.3). Replace the DADF PWB (PL 15.3).

• Code: 005-914
• Description: DADF APS1, 2, 3, Sensor Static Jam APS1, 2, 3, Sensor On detected at the timing below: 1. Power On 2. Feeder Cover Interlock Close 3. Platen Interlock Close.
• Remedy: If the problem occurs frequently, make sure that there is no obstacle blocking the light path on APS1, 2, 3, Sensor. Check the connections between the APS1, 2, 3, Sensor and the DADF PWB. If OK, replace the APS1, 2, 3, Sensor. If the problem persists, replace the DADF PWB (PL 15.3).