Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 4020 — Trang 5/11

Code: 29.3:01

Description: Printhead Cleaner not inserted correctly in slot 4.
Remedy: • Open the Printhead Cleaner Access Door and check that the Magenta Printhead Cleaner is correctly seated in slot 4 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Magenta Printhead Cleaner in slot 4 of the Service Station.

Code: 29.4:01

Description: Printhead Cleaner not inserted correctly in slot 5.
Remedy: • Open the Printhead Cleaner Access Door and check that the Black Printhead Cleaner is correctly seated in slot 5 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Black Printhead Cleaner in slot 5 of the Service Station.

Code: 29.5:01

Description: Printhead Cleaner not inserted correctly in slot 6.
Remedy: • Open the Printhead Cleaner Access Door and check that the Black Printhead Cleaner is correctly seated in slot 6 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Black Printhead Cleaner in slot 6 of the Service Station.

Code: 29.6:01

Description: Printhead Cleaner not inserted correctly in slot 7.
Remedy: • Open the Printhead Cleaner Access Door and check that the Cyan Printhead Cleaner is correctly seated in slot 7 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Cyan Printhead Cleaner in slot 7 of the Service Station.

Code: 29.7:01

Description: Printhead Cleaner not inserted correctly in slot 8.
Remedy: • Open the Printhead Cleaner Access Door and check that the Cyan Printhead Cleaner is correctly seated in slot 8 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Cyan Printhead Cleaner in slot 8 of the Service Station.

Code: 41:03

Description: Electrical current limit in Media-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Replace the Media-Axis Motor. • If the System Error continues, replace the PrintMech PCA.

Code: 41:10

Description: Electrical fault in Media-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Media-Axis Motor cable is not damaged and is correctly connected to the PrintMech PCA. • Replace the Media-Axis Motor. • If the System Error continues, replace the PrintMech PCA.

Code: 42:03

Description: Electrical current limit in Scan-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of media blocking the Carriage Assembly, then clear the obstruction. • Replace the Scan-Axis Motor. • If the System Error continues, replace the PrintMech PCA.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie