Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 4020 — Trang 4/11

Code: 26.3:01

Description: Bad contact detected in ISS slot3 floater.
Remedy: • Remove the Cyan Ink Cartridge and reinstall it in to the Printer. • Replace the Cyan Ink Cartridge. • Check that the ISS to Cartridge cable (Cyan Ink Cartridge) is not damaged and is correctly connected to the Ink Supply Tubes PCA. • Replace the ISS to Cartridge cable (Cyan Ink Cartridge). • Replace the Ink Supply Tubes and Trailing Cable.

Code: 26.n:10

Description: Order of Ink Supplies incorrect.
Remedy: • Remove the Ink Cartridges and check that they are the correct ones for this Printer and that they are inserted in the correct position. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 26:14

Description: A wrong Ink Cartridge has been detected.
Remedy: • Remove the Ink Cartridges and check that they are the correct ones for this Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the Ink Cartridges.

Code: 27:03

Description: An error has occurred in Printhead detection.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the Printheads from the Carriage and reinsert them. • Replace the Printheads. • Replace the Carriage Flex Cables.

Code: 27:14

Description: A wrong Printhead has been detected.
Remedy: • Remove the Printheads and check that they are the correct ones for this Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the Printheads.

Code: 29.0:01

Description: Printhead Cleaner not inserted correctly in slot 1.
Remedy: • Open the Printhead Cleaner Access Door and check that the Yellow Printhead Cleaner is correctly seated in slot 1 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Yellow Printhead Cleaner in slot 1 of the Service Station.

Code: 29.1:01

Description: Printhead Cleaner not inserted correctly in slot 2.
Remedy: • Open the Printhead Cleaner Access Door and check that the Yellow Printhead Cleaner is correctly seated in slot 2 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Yellow Printhead Cleaner in slot 2 of the Service Station.

Code: 29.2:01

Description: Printhead Cleaner not inserted correctly in slot 3.
Remedy: • Open the Printhead Cleaner Access Door and check that the Magenta Printhead Cleaner is correctly seated in slot 3 of the Service Station and then close the Printhead Cleaner Access Door. • Replace the Magenta Printhead Cleaner in slot 3 of the Service Station.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie