Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 4020 — Trang 6/11

Code: 42:10

Description: Electrical fault in Scan-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Scan-Axis Motor cable is not damaged and is correctly connected to the PrintMech PCA. • Replace the Scan-Axis Motor. • If the System Error continues, replace the PrintMech PCA.

Code: 43:10

Description: Vacuum Fan has stopped functioning.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Vacuum Fan cables are not damaged and are correctly connected to the Interconnect PCA. • Also check that the cables between the Interconnect PCA and the PrintMech PCA are not damaged and are correctly connected. • Replace the Vacuum Fan. • If the System Error continues, replace the PrintMech PCA.

Code: 44:10

Description: Problem with the Aerosol Fan.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Aerosol Fan cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Aerosol Fan. • If the System Error continues, replace the Interconnect PCA.

Code: 44:11

Description: Aerosol Fan not connected.
Remedy: • Check that the Aerosol Fan cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Aerosol Fan.

Code: 51.1:10

Description: PHC Access Door Sensor failure.
Remedy: • Check that the PHC Access Door Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the PHC Access Door Sensor.

Code: 51:10

Description: Window Sensor failure.
Remedy: • Check that the Window Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Window Sensor.

Code: 52:10

Description: Drop Detector switch On/Off failure.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Drop Detector cable is not damaged and is correctly connected to the Service Station cable. • Check that the Service Station cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Drop Detector. • Replace the Gamut PCI PCA. • If the System Error continues, replace the Interconnect PCA. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Code: 53:10

Description: Media Sensor failure.
Remedy: • Check that the Media Sensor cable is not damaged and is connected correctly to the Interconnect PCA. • Replace the Media Sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie