Code :

Code: 54:10
Description: Media Lever Sensor failure.
Remedy: • Check that the Media Lever Sensor cable is not damaged and is connected correctly to the Interconnect PCA. • Replace the Media Lever Sensor.

Code: 55:10
Description: Problem with the Line Sensor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Line Sensor. • If the System Error continues, replace the Carriage PCA.

Code: 56:03
Description: Analog Encoder calibration failed.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Encoder Disc and Sensor. • If the System Error continues, replace the PrintMech PCA.

Code: 61:01
Description: The file format is incorrect and the Printer cannot process the job.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check the graphic language setting of the Printer (Refer to the User’s Guide). • Resend the file to the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 61:04.1
Description: The Postscript fonts are missing. Upgrading the Firmware will re-install the fonts.
Remedy: Perform a full firmware upgrade that includes package ’B’.

Code: 63:04
Description: Input/Output problem through the Network Card.
Remedy: • Check that the Network cable is correctly connected to the Network Card. • If a Gigabit Ethernet Card is being used, make sure it is correctly installed. If necessary, replace the Gigabit Ethernet Card. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • If the System Error continues, replace the Main PCA.