• Code: 72:04
• Description: Generic Firmware error.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

• Code: 73:03
• Description: Servo Error.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Perform the "Scan-Axis" Diagnostic to further troubleshoot the error code. • If the System Error continues, perform the "Media Drive" Diagnostic to further troubleshoot the error code.

• Code: 74:00
• Description: Failed getting Part Number/Serial Number.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

• Code: 74:01
• Description: Error uploading firmware update file.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the firmware update file to the Printer.

• Code: 74:04
• Description: Old Vacuum Fan detected - upgrade the Firmware.
• Remedy: • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

• Code: 76:03
• Description: Out of Disk space - Data was lost.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the file to the Printer. • If the System Error continues, it is recommended that you remove any unnecessary files from the Hard Disk Drive using the Web Server. • Perform an EEROM Reset and resend the file to the Printer.

• Code: 77:04
• Description: Embedded Web Server internal software error.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

• Code: 79.1:04
• Description: CDS server lost connection with client.
• Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.