Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M4349x MFP — Trang 18/22

Code: 55.01.YY

Display: 55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On
Description: The print engine is not communicating with the formatter.
Incoming parity error
Remedy: Turn the MFP off, and then turn the MFP on.

Code: 55.02.YY

Display: 55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On
Description: The print engine is not communicating with the formatter.
Outgoing parity error
Remedy: Turn the MFP off, and then turn the MFP on.

Code: 55.04.YY

Display: 55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On
Description: The print engine is not communicating with the formatter.
Communications timeout
Remedy: Turn the MFP off, and then turn the MFP on.

Code: 55.05

Display: 55.05 Error - To continue turn off then on
Description: This Remote Firmware Upgrade (RFU) error message occurs when an upgrade on the firmware is being performed and something has happened that prevented the upgrade.
Remedy: Turn the MFP off, and then turn the MFP on.

Code: 56.1

Display: 56.X ERROR - To Continue Turn Off Then On
Description: The input device or output device is unknown.
Unknown input device
Remedy: 1. Turn the MFP off, and then turn the MFP on. 2. For 56.1 errors, reinstall all of the input devices (optional 500-sheet feeders or the envelope feeder.) For 56.2 errors, reinstall the output bin, the stapler/ stacker, or the 3-bin mailbox. 3. Remove all non-HP paper-handling devices.

Code: 56.2

Display: 56.X ERROR - To Continue Turn Off Then On
Description: The input device or output device is unknown.
Unknown output device
Remedy: 1. Turn the MFP off, and then turn the MFP on. 2. For 56.1 errors, reinstall all of the input devices (optional 500-sheet feeders or the envelope feeder.) For 56.2 errors, reinstall the output bin, the stapler/ stacker, or the 3-bin mailbox. 3. Remove all non-HP paper-handling devices.

Code: 57.01

Display: 57.01 Error - To continue turn off then on
Description: The DC controller fan (FN104) is not functioning.
Remedy: 1. Verify that the connector J66 on the DC controller is firmly seated. 2. Listen for the fan to operate while the MFP is initializing. 3. If the fan does not operate during the initialization sequence, replace it.

Code: 57.03

Display: 57.03 Error - To continue turn off then on
Description: The print-cartridge fan (FN102) is not functioning.
Remedy: 1. Verify that the connector J78 on the DC controller is firmly seated. 2. Listen for the fan to operate while the MFP is initializing. 3. If the fan does not operate during the initialization sequence, replace it.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie