Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI B6300 — Trang 6/27

Code: 004-363

Description: Main Motor fail of rotation
Causes: Main Motor fail of rotation Power OFF and /ON. Replace Main Motor.

Code: 004-922

Description: No Toner
Causes: Time to change drum/toner cartridge Change drum/toner cartridge

Code: 006-335

Description: ROS Motor fail of rotation
Causes: Revolution of ROS Motor doesn’ t become the correct ones for 15sec and 2sec while Warm Up and Run, respectively. Defect of ROS Motor(ROS Assy) Disconnection of wires from MCU PWB J14 to ROS Assy J140 or loose connection.

Code: 007-313

Description: Option Tray 4cCommunucation Fail
Causes: The response of communication with RemoteCPU is error. Check the connection to Option Tray 4.

Code: 007-950

Description: Tray 1 Paper Size Mismatch (length slows scan direction error)
Causes: Defect that the length (slows scan direction) of paper fed from Tray 1/ 2/3/4 is different form the specified length by measuring with REGI. Sensor. Slip of paper feeding roll, wear, fail of rotation Wear of paper feeding gear, jumping, fail of rotation Dirt or defect of REGI. Sensor REGI. Clutch slip, operational falure

Code: 007-951

Description: Tray 2 Paper Size Mismatch (length slows scan direction error)
Causes: Defect that the length (slows scan direction) of paper fed from Tray 1/ 2/3/4 is different form the specified length by measuring with REGI. Sensor. Slip of paper feeding roll, wear, fail of rotation Wear of paper feeding gear, jumping, fail of rotation Dirt or defect of REGI. Sensor REGI. Clutch slip, operational falure

Code: 007-952

Description: Tray 3 Paper Size Mismatch (length slows scan direction error)
Causes: Defect that the length (slows scan direction) of paper fed from Tray 1/ 2/3/4 is different form the specified length by measuring with REGI. Sensor. Slip of paper feeding roll, wear, fail of rotation Wear of paper feeding gear, jumping, fail of rotation Dirt or defect of REGI. Sensor REGI. Clutch slip, operational falure

Code: 007-953

Description: Tray 4 Paper Size Mismatch (length slows scan direction error)
Causes: Defect that the length (slows scan direction) of paper fed from Tray 1/ 2/3/4 is different form the specified length by measuring with REGI. Sensor. Slip of paper feeding roll, wear, fail of rotation Wear of paper feeding gear, jumping, fail of rotation Dirt or defect of REGI. Sensor REGI. Clutch slip, operational falure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie