• Code: 900
• Description: RIP Software Error
• Remedy:

• Code: 902
• Description: Service Engine Error 0
• Remedy: General Engine Software Errors 902 through 907 indicate an unrecoverable engine software error. The system board may cause this type of error. Turn the printer off and on to try and clear the error code. If this does not fix the problem after several attempts, call your next level support before replacing the system board.

• Code: 904
• Description: Engine Software
• Remedy: Interface violation by RIP - Check all cabling and connections to the system board. If no problem is found, replace the system board.

• Code: 906
• Description: Engine RAM Error
• Remedy: Engine RAM Error - Replace the system board

• Code: 907
• Description: Engine Flash Error
• Remedy: Engine Flash Error - The system board might be causing the error code. Try the following: Reflash the system board with the correct level code. If this does not fix the problem, replace the system board.

• Code: 920
• Description: Color Calibrate
• Remedy: Unrecoverable TPS Gain Error - Replace the ITU assembly

• Code: 921
• Description: Color Calibrate
• Remedy: Unrecoverable TPS Error - Replace the ITU assembly.

• Code: 922
• Description: Color Calibrate
• Remedy: Unrecoverable TPS Invalid Belt - Replace the ITU assembly