• Code: 142
• Description: Motor
• Remedy: DC pick motor, over speed - staging motor - replace the “Staging motor”. If this does not fix the problem, replace the “System board”.

• Code: 143
• Description: Motor
• Remedy: DC pick motor, no encoder feedback - staging motor - replace the “Staging motor” on page 4-79. If this does not fix the problem, replace the “System board” on page 4-80.

• Code: 144
• Description: Motor
• Remedy: DC motor accel stall - autocompensator motor - replace the “Autocompensator pick assembly” on page 4-24. If this does not fix the problem, replace the “System board” on page 4-80.

• Code: 145
• Description: Motor
• Remedy: DC motor excessive PWM autocompensator motor - replace the “Autocompensator pick assembly” on page 4-24. If this does not fix the problem, replace the “System board” on page 4-80.

• Code: 146
• Description: Motor
• Remedy: Autocompensator motor over speed, autocompensator motor - replace the “Autocompensator pick assembly” on page 4-24 If this does not fix the problem, replace the “System board” on page 4-80.

• Code: 147
• Description: Motor
• Remedy: There is no autocompensator DC motor feedback. Replace the “Autocompensator pick assembly” on page 4-24. If this does not fix the problem, replace the “System board” on page 4-80.

• Code: 148
• Description: Motor
• Remedy: ITU belt motor, unable to lock - go to “148 error code” on page 2-57.

• Code: 150
• Description: Motor
• Remedy: Black cartridge motor unable to lock - go to “150 error code” on page 2-58.