• Code: 960
• Description: RAM Memory Error
• Remedy: RAM soldered on board is bad. Replace the system board.

• Code: 961
• Description: RAM Memory Error
• Remedy: There is an error in the memory installed in the memory option slot on the system board. If another memory option is available, switch the memory options to isolate the problem. If you do not have a spare memory option to switch, then replace the memory installed. If this does not fix the problem, replace the “System board”

• Code: 964
• Description: Emulation Error
• Remedy: Download emulation CRC failure has occurred. The following actions may be taken: 1. Disable the Download Emulation 2. Program the download emulation into the code overlay SIMM, again. 3. If the problem is not resolved, replace the code overlay SIMM and download emulation, again.

• Code: 975
• Description: Standard Network or Network Card x
• Remedy: Unrecognizable network Errors 975 through 979 indicate a failure with the standard network port located on the system board or a network card in the specified slot x, x=1, 2 or 3. Replace the card in the specified slot.

• Code: 976
• Description: Standard Network
• Remedy: Unrecoverable software or error in network for network card x. If unable to clear the error message, check the following: • If installed, check network card for correct installation. • If correctly installed, replace the network card. • If a network card is not installed, replace the system board

• Code: 978
• Description: Standard Network or Network Card x
• Remedy: Bad checksum while programming network Network Card x port.

• Code: 979
• Description: Standard Network or Network Card X
• Remedy: Flash parts failed while programming Network Card x port.

• Code: 980
• Description: <device> comm
• Remedy: Engine is experiencing unreliable communications to the specified device. Errors 980 through 984 indicate the specified device has detected a Paper Port communication failure.