• Code: 016-503 ... 016-507
• Description: E-mail Error An e-mail error has occurred. • 016-503: SMTP Error 016-503 Scan Job Failure Press OK • 016-504: POP Error 016-504 Scan Job Failure Press OK • 016-506: SMTP Login Error 016-506 Scan Job Failure Press OK • 016-507: SMTP Error 016-507 Scan Job Failure Press OK
• Causes: • IP Board, PL7.1.9 • MCU Board, PL7.2.2
• Remedy: 1. Reseat all connectors on the IP Board and the MCU Board. Does the error persist? Go to step 2. Complete. 2. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist when the power is turned on? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

• Code: 016-718
• Description: Memory Overflow Unable to process the PCL print data because of insufficient memory.
• Causes: • IP Board, PL7.1.9/PL7.1.16 • MCU Board, PL7.2.2
• Remedy: 1. Reduce the resolution of the print job. does the error persist? Go to step 2 Complete. 2. Verify the controller firmware version. Update to latest version if not at latest version now. Does the error persist? Go to step 3 Complete. 3. Reseat all connections on the IP Board. Does the error persist? Go to step 4. Complete. 4. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? Go to step 5. Complete. 5. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

• Code: 016-719
• Description: Decode Error Decode error is detected.
• Causes: • IP Board, PL7.1.9 • MCU Board, PL7.2.2
• Remedy: 1. Reseat all connectors on the IP Board and the MCU Board. Does the error persist? Go to step 2. Complete. 2. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist when the power is turned on? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

• Code: 016-720
• Description: PDL Error The current printing job process cannot be continued because the memory capacity is exceeded.
• Causes: • IP Board, PL7.1.9/PL7.1.16 • MCU Board, PL7.2.2
• Remedy: 1. Check the memory. Print the Configuration Page to determine the amount of memory installed. Is the print job too large? Divide the print job to fit installed memory. Go to step 2. 2. Reseat all connections on the IP Board. Does the error persist? Go to step 3. Complete. 3. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? Go to step 4. Complete. 4. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

• Code: 016-737
• Description: Download Errors The system firmware file is incorrect, corrupt, or communications to the printer failed. • 016-737: Format Error Press OK Button <Download Format Error> The file format is invalid.
• Causes: • IP Board, PL7.1.9/7.1.16 • MCU Board, PL7.2.2
• Remedy: 1. Reseat all connectors on the IP Board and the MCU Board. Does the error persist? Go to step 2. Complete. 2. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Go to step 3. Complete. 3. Does the error persist? Contact your designated field support for assistance. Complete.

• Code: 016-741 ... 016-745
• Description: Download Errors The system firmware file is incorrect, corrupt, or communications to the printer failed. • 016-741: Protection Error <Download Protect Error> The Protect is invalid. Download was attempted under the condition where it is prohibited. • 016-742: Invalid ID Press OK Button <Download ID Error> An error occurred because an invalid firmware is installed. • 016-743: Range Check Error <Download Range Error> The address of the write destination is invalid. • 016-744: Format Error 016-744 System Invalid Data Press OK <Download Format Error> Invalid file format to be downloaded. • 016-745: Format Error 016-745 System Invalid Data Press OK <Download Protect Error> Download destination device protection on.
• Causes: • IP Board, PL7.1.9/7.1.16 • MCU Board, PL7.2.2
• Remedy: 1. Reseat all connectors on the IP Board and the MCU Board. Does the error persist? Go to step 2. Complete. 2. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Go to step 3. Complete. 3. Does the error persist? Contact your designated field support for assistance. Complete.

• Code: 016-749
• Description: PJL Request Error The print data cannot be processed by PJL.
• Causes: • IP Board, PL7.1.9/7.1.16 • MCU Board, PL7.2.2
• Remedy: 1. Reseat all connectors on the IP Board and the MCU Board. Does the error persist? Go to step 2. Complete. 2. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

• Code: 016-753
• Description: PDL Emulation Error PDL emulation error has occurred
• Causes: • Control Panel
• Remedy: 1. If necessary, check whether the correct machine password has been instructed to the other machine. Does the error persist? Complete.