• Code: 15.03.01:01, 15.03.02:01
• Description: Drying fan array 0X in error state. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: At least one fan is not spinning (blocked or broken).
• Remedy: Search for the faulty fan and replace it.

• Code: 15.03.01:42, 15.03.02:42
• Description: Drying fan array 0X current value too low. Reinitialize carriage to recover the system. Replace affected part.
• Causes: a. At least one fan is not connected to the fan harness. b. At least one fan is failing. c. A fan fuse is blown. d. There is an error in a pressure servo (incorrect PWM).
• Remedy: 1. Visually inspect the fan array harness. 2. Replace the fuse. 3. Reset or restart the system.

• Code: 15.06.01:01, 15.06.02:01
• Description: Drying PCA 0X lamps disabled. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Safety issue or wrong working condition detected. Typically this error will never show up alone, it is consequence of another error condition.
• Remedy: Run subsystem diagnostics to identify root cause.

• Code: 15.07.01:01, 15.07.02:01
• Description: Drying PCA 0X relay error. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: a. There is a drying PCA power problem. b. One (or both) relays are in S.C. or GPIO is stuck in logical level 1. c. Some cable into the AC circuit is not connected. d. One (or both) is in O.C.
• Remedy: 1. Run subsystem diagnostics to confirm the problem. 2. Replace the drying PCA. See Drying PCA. 3. Replace the fuse. 4. Reconnect properly.

• Code: 15.07.01:93
• Description: Drying PCA 01 relay check failed. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Drying PCA relay failed
• Remedy: Check with diagnostics and replace the PCA if necessary. See Drying PCA.

• Code: 15.07.02:93
• Description: Drying PCA 02 relay check failed. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Drying PCA relay failed
• Remedy: Check with diagnostics and replace the PCA if necessary. See Drying PCA.

• Code: 15.08.01:15
• Description: Drying PCA 01 fuse 1 burnt. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Fuse burnt out.
• Remedy: 1. Run subsystem diagnostics to confirm the problem. 2. Replace the fuse. 3. Replace the drying PCA.

• Code: 15.08.02:15
• Description: Drying PCA 02 fuse 1 burnt. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Fuse burnt out.
• Remedy: 1. Run subsystem diagnostics to confirm the problem. 2. Replace the fuse. 3. Replace the drying PCA. See Drying PCA.