• Code: 15.08.03:15
• Description: Drying PCA 01 fuse 2 burnt. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Fuse burnt out.
• Remedy: 1. Run subsystem diagnostics to confirm the problem. 2. Replace the fuse. 3. Replace the drying PCA.

• Code: 15.08.04:15
• Description: Drying PCA 02 fuse 2 burnt. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: Fuse burnt out.
• Remedy: 1. Run subsystem diagnostics to confirm the problem. 2. Replace the fuse. 3. Replace the drying PCA.

• Code: 15.09.01:01
• Description: Drying PCA 01 substrate crash sensor 1. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative. Crash sensor 1 is detecting an obstacle.
• Causes: a. Printhead crash against the substrate b. Any obstacle in the carriage path c. Dirty sensor d. Faulty sensor
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Clean the sensor. 3. Replace the sensor.

• Code: 15.09.01:92
• Description: Substrate crash sensor 01 check failed. Reinitialize carriage to recover the system. If this doesn't work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: a. Any obstacle in the carriage path b. Dirty or misplaced sensor c. Cabling problem d. Drying PCA problem
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Check that nothing is blocking the crash sensor. 3. Reboot in diagnostic mode and run crash sensor and drying diagnostics. 4. Check cable and fiber-optic ends.

• Code: 15.09.02:01
• Description: Drying PCA 02 substrate crash sensor 1. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative. Crash sensor 1 is detecting an obstacle.
• Causes: a. Printhead crash against the substrate b. Any obstacle in the carriage path c. Dirty sensor d. Faulty sensor
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Clean the sensor. 3. Replace the sensor.

• Code: 15.09.02:92
• Description: Substrate crash sensor 02 check failed. Reinitialize carriage to recover the system. If this doesn't work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
• Causes: a. Any obstacle in the carriage path b. Dirty or misplaced sensor c. Cabling problem d. Drying PCA problem
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Check that nothing is blocking the crash sensor. 3. Reboot in diagnostic mode and run crash sensor and drying diagnostics. 4. Check cable and fiber-optic ends.

• Code: 15.09.03:01
• Description: Drying PCA 03 substrate crash sensor 2. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative. Crash sensor 2 is detecting an obstacle.
• Causes: a. Printhead crash against the substrate b. Any obstacle in the carriage path c. Dirty sensor d. Faulty sensor
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Clean the sensor. 3. Replace the sensor.

• Code: 15.09.04:01
• Description: Drying PCA 04 substrate crash sensor 2. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative. Crash sensor 2 is detecting an obstacle.
• Causes: a. Printhead crash against the substrate b. Any obstacle in the carriage path c. Dirty sensor d. Faulty sensor
• Remedy: 1. Check that the carriage can move freely without obstacles. 2. Clean the sensor. 3. Replace the sensor.