Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Latex 330 — Trang 4/32

Code: 12.15:10

Description: Printmech: 42V to Paper motor failure
Causes: The 42V cable from Printmech to Paper motor has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech to paper motor cable. 2. Check the paper motor. 3. Check the Printmech PCA.

Code: 12.16:10

Description: Printmech: 42V to Rewinder failure
Causes: The 42V cable from Printmech to Rewinder has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech to Rewinder cable. 2. Check the Rewinder. 3. Check the Printmech PCA.

Code: 12.17:10

Description: Printmech: 42V to Scan motor failure
Causes: The 42V cable from Printmech to Scan motor has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech to Scan motor cable. 2. Check the Scan motor. 3. Check the Printmech PCA.

Code: 12.18:10

Description: Printmech: 42V to SOL slit solenoid failure
Causes: The 42V cable from Printmech to SOL slit solenoid has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech to SOL slit solenoid cable. 2. Check the slit solenoid. 3. Check the Printmech PCA.

Code: 12.19:10

Description: Printmech: 5V line failure
Causes: The 5V cable from Printmech to PSU has a problem Printmech PCA is damaged PSU is damaged.
Remedy: Call agent: • Restart the printer.

Code: 12.1:10

Description: The 12V provided from Printmech to Curing module PCA are out of range (10,8V to 13,2V)
Causes: One or more of the components powered by the 12V at the Curing Control PCA are causing a short circuit. The 12V cable from Printmech to the Curing Control PCA has a problem.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech cable to the Curing module PCA. 2. Check the Printmech PCA.

Code: 12.20:10

Description: Printmech: 12V to Curing module PCA open circuit
Causes: The 12V cable from Printmech to Curing Control PCA has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check cable the Printmech to Curing module cable. 2. Check the Printmech PCA.

Code: 12.21:10

Description: Printmech: 24V to Curing module PCA open circuit
Causes: The 24V cable from Printmech to Curing Control PCA has a problem Printmech PCA is damaged.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check the Printmech to Curing module PCA cable. 2. Check the Printmech PCA.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie