Mã lỗi Toshiba e-Studio 200CP — Trang 4/14
Description: Fuser Error
Remedy: Fuser failed to reach standby temperature -BUR
Description: Fuser Error
Remedy: Fuser cold hot roll
Description: Fuser Error
Remedy: Fuser cold roll - BUR
Description: Fuser Error
Remedy: Fuser lamp on too long hot roll
Description: Fuser Error
Remedy: Fuser lamp on too long BUR
Description: Fuser Error
Remedy: Fuser cam position not found
Description: Motor
Remedy: DC motor accel stall - staging - replace the Staging motor. If this does not fix the problem, replace the “System board”
Description: Motor
Remedy: DC pick motor excessive PWM - staging motor - replace the “Staging motor”. If this does not fix the problem, replace the “System board”