• Code: 16-150-14
• Description: Unable to Obtain RPC Transport 16-150-14 Unable to obtain RPC transport NOTE: Status codes 03-518 and 16-502 are raised with this fault code.
• Remedy: If a single occurrence, the network controller automatically retries. The error persists. Y↓N→Perform SCP 6 Final Actions. Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.

• Code: 16-150-19
• Description: NC Sync Peer Service Fault 16-150-19 Unable to sync peer infrastructure services. Operating system tries 3 times; If fault continues, the ESS is reset.
• Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.

• Code: 16-150-26
• Description: Fault Service Failed to Write to Log 16-150-26 Fault Service Failed to write to log
• Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.

• Code: 16-150-90
• Description: Invalid IPC Request Destination 16-150-90 Invalid IPC request destination NOTE: Status codes 03-518 and 16-502 are raised with this fault code.
• Remedy: If a single occurrence, the network controller automatically retries. The error persists. Y↓N→Perform SCP 6 Final Actions. Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software

• Code: 16-150-92
• Description: Consumer Interface Fault 16-150-92 Consumer interface fault NOTE: Status codes 03-518 and 16-502 are raised with this fault code.
• Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.

• Code: 16-151-09 ... 16-151-19
• Description: Invalid IPC Command / SNMP Reg Failure 16-151-09 Invalid IPC command 16-151-14 SNMP event registration failed 16-151-19 Invalid IPC command NOTE: Status codes 03-518 and 16-502 are raised with these fault codes.
• Remedy: If a single occurrence, the network controller automatically retries. The error persists. Y↓N→Perform SCP 6 Final Actions. Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.

• Code: 16-151-26
• Description: Fault Service Failed to Get a Log Handle 16-151-26 Fault service failed to get a log handle
• Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software

• Code: 16-151-90
• Description: Put Environment Variable Failure 16-151-90 Put environment variable failure NOTE: Status codes 03-518 and 16-502 are raised with this fault code.
• Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions. Perform GP 9 to reload system software.